Training Room Folding Partition , Office Aluminum Sliding
Doors , 100mm Panel
Specifications
Technical Parameter for Partition Panel | Panel Width | 500 - 1230mm | Panel height | 2000 - 13000mm | Sound proof | 42 - 55 db | Operation | Manual | Frame | Aluminum | Vertical profile | Anodised aluminum profiles with integrated magnetic strip and
sealing edges on the inside | Finish options | Fabric, veneer, HPL melamine, vinyl, carpet, customers own
material, Bare finish | Base options | Plywood, Gypsum, steel, MDF | Max width | Unlimited | Panel weight | 30 – 48 kg / sq | Pass door selection | door | Single or double door | Seals | Top | Manual | bottom | Manual |
Panel Surface Finish :
The panel surface will be as per the clients requirement finished
either in BUNGE factory – China or by others . The
basic panels will be raw MDF (the finish materials such as laminate, veneer, melamine or fabric
etc .)
Retractable mechanism :
The top and bottom rail of each panel shall incorporate an extruded
aluminum box section mechanical seal manually operated by a handle
inserted in the panel stile , turning the handle through 45 degrees
shall simultaneously extend or retract the top and bottom seals
through an steel and spring mechanism which shall firmly hold the
seals in the retracted or extended mode . Single crank
type mechanisms shall activate floor and head seals.
Applications :
Our products (Movable Partitions) are widely used in the hotel
banquet halls , meeting rooms , exhibition halls , conference rooms
, International Convention Centers , KTVs , upscale restaurants ,
office buildings , schools , hospitals and others .
Stacking :
The panels will be stacked as per the agreed method and in
accordance with the architetural plan. Centre stacking arrangement
will be utilized for the subject project.
Operation :
Partitions shall be top supported, manually operated panels stacked
in an area nominated in the plans. When closed, the operable wall
shall provide a complete sound retardant barrier. No floor track
shall be used.
Track :
The tracks are made from extruded 6063 – T6 anodized aluminum . The
track housing shall utilize grooves and interlocking steel pins for
positive alignment of adjacent track sections , and shall be
reinforced overhead by drop rod brackets . Aluminum track housing
shall include an integral nut slot to accept a hardened square nut
for attaching each drop rod bracket to the top of the track .
Trolley :
BUNGE Centre / Side / Remote stacking system with a Two wheeled
nylon trolley made with the base Material of POM 45 tempered steel
shall be used as per approved stacking method .
|
