Commercial Furniture Office Modular Cubicles Sliding Partition Panel For Ballroom

Office Modular Cubicles Sliding Partition Panel Ballroom Movable Partition

Description:
 

In the past, there are special occasions where a large space was divided into different levels and different specifications. It took a lot of steps to complete the work, and the space that may be distributed sometimes is not particularly reasonable due to technical reasons.

It will be affected, and this problem has been effectively solved since the rise of movable partition wall. The use of movable partition wall to separate the large space and the effect is outstanding, and it is very simple to use, no problem, and its The so-called active partition is the performance of free movement.

Installation movable wall partition is free to place its own position, and unsatisfactory can be properly moved without spending too much time.

 
Feature:
 

1.Space management ~ Movable walls offer an effective space solution for many environments including offices, educational establishments, sporting facilities, dining and entertainment facilities, religious centres, or retail areas.

2.Smart use of space – Movable walls offer a flexible solution for making the most of an interior space. Room sizes can be changed in a matter of moments to capitalise on the revenue potential of commercial space or simply create the most efficient use of floor space.

3.Acoustics ~ the movable wall is the highest specification range of fully operable, individual-panel systems. Acoustic insulation of up to 53 dB noise reduction is achieved with a combination of acoustic infill’s and operable top and bottom seals.

4.Operation ~ space without a trace ~ when the operable seals are retracted the panels will glide effortlessly and quietly along the unique aluminium overhead track system (no need for floor guide). Final closure of each panel is by a removable operating handle that extends the seal from the top and bottom of each panel forming an acoustic seal.

 
Technical information:

Advantage:

Top hung with no floor track required.

High acoustic ratings up to 53dB (independent laboratory tested) available.

Retractable acoustic seals at top and bottom of each panel operated either by a quick release handle.

Single or twin point suspension for central or offset stacking options.

Variable track arrangements.

Junction panels enable corner, three or four way abutments.

Application:

Movable partition has good sound absorbing effect and fireproof effect. It can be used in different occasions. It can be used in the meeting of the company. It is very effective to use the movable partition in some densely populated restaurants. The surface of the movable partition is very Smooth, it is very convenient to wipe when needed.

Movable partition belongs to the products in the partition series, and is widely used in high-end places such as hotels, hotels, schools, business clubs, exhibition centers, etc. Therefore, the beauty and quality of the screens of the activities are the first choice for VIP customers, and the planning of the scheme should pay more attention to the overall situation. The overall look is more atmospheric and luxurious. We pay more attention to customer perception, fully consider customer needs, and provide you with a more perfect experience.

Movable Partition Wall installing:

When the operable folding wall system is supported at the ceiling it runs along an adjustable aluminum upper track that is equipped with bearings inside of carriages.

This enables the walls height to be adjusted by 15 mm. The carriages are installed on every second wall panel and are located at the center of the panel. Because the wall hangs from the ceiling, it is important for the installation of the wall that the wall is attached to something solid (i.e. concrete ceiling, steel structure, wood beam etc.).

In the case that the folding wall is supported by the ground, an aluminum track is installed on the floor where the carriages move the wall and at the top there is a guiding track. The height is also adjustable by 15 mm.

At the end of the wall, a jamb profile is installed to close the last panel and which is also used as a door. This, together with the jamb is installed to start the wall and allows for the walls width to be adjusted 20 mm.

Our service:

A full professional design service.

Survey and installation service - using UK manufactured materials and components and a fully experienced fitting team.

Maintenance contracts - to ensure your valuable asset remains in full working order.

Over 20 years industry experience employed for every installation we complete.