Folding Partition Walls Divider Office Movable Partition For Decoration

Movable folding partition walls divider office movable partition for decoration

Description:

Movable partition walls divide a room in minutes with a single thickness of 65 mm sliding panels. No heavy beams or bracing in the ceiling is required. The lightweight top guide track can even mount directly to a suspended ceiling. The floor track is easily removable so the floor is clear when the room divider is not in use.

Movable Wall has excellent acoustical properties. When it comes to sound insulation this Movable Acoustic Wall is the obvious choice, its sound insulation ranges from 37-53 decibels.

Movable Wall Panels runs smoothly along its tracks on ball-bearing trolleys and is very easy to operate, it is rigid, robust and has safety features that assist in its operation.

Technical parameters:

1.Folding glass partition walls can separate the space speedily and conveniently.

2.Top hung system without the need for a floor track.

3.Office partition wall is made from high-density aluminum frame, special made rubber, excellent sound insulation cotton and finish surface, etc.

4.Around the panel, there is sound insulation rubber, it can help to insulate the sound entering.

5.The aluminum partition wall finished panel is hanging on the aluminum track, assembled with muti direction wheels.

6.Interlocking male / female trapezoidal vertical aluminum profiles, for soundproof connection between elements.

Sound insulation:

The sound insulation coefficient of partitions comes from many directions, not only in the partition wall itself but also in other links, as follows:
1. Horizontal sound insulation

In order to achieve the best sound insulation, two layers of sound-absorbing rubber structure are used. Using the jack principle, the double rubber strip is pressed against the ceiling track and floor to provide high stability of the active partition.

2. Corner sound insulation
The use of specially shaped rubber-like corner elements solves the technical problems of handling corner seals; at the same time, superior stability and sound insulation are achieved.

3. Vertical sound insulation
All the soundproof walls are made of highly elastic vertical contact side, concave and convex groove close-fitting principle, to ensure the best closure and sound insulation.

4. Skeleton
In view of the hanging structure of the wall plate, it can be freely shaken, and the metal hoop elements between the wall plates are closely combined, effectively blocking the sound transmission. Panels can be replaced as needed for interior design without damaging the entire panel.