Interior Material Sliding Door Movable Wall Folding Room Partitions Aluminium Profile

Sliding Door Aluminium Profile Movable Wall Folding Room Partitions

Specification:

The folding room partition is a kind of operable wall that can divide a large space into a small space or a small space into a large space at any time according to needs and has a general wall function. It can serve as a multi-purpose room with multiple functions.

The folding room partition has the characteristics of easy installation, reliability, industrial production, fire prevention, and environmental protection.

Feature:

Environmental protection and light material.

Top hung system without the need for a floor track.

Retractable top and bottom seals ensure effortless movement of panels.

Concealed or exposed panel edge profiles.

Numerous panel stacking options for complete flexibility.

Extensive range of surface finishes available, easy construction and transportation.

The system offers various levels of sound reduction.

Combines elegance with robust construction.

Improved sound insulation with a reduced wall thickness.

Space savings in the parking area.

Technical information:

Surface:

MDF, splint, melamine, cloth/leather Pu, and fireproof panels.

Melamine: In fact, it is a layer of colored paper pressed on the fiber board;

The moisture resistance of the splint is better than that of the MDF; the disadvantage is that the surface flatness is worse than that of the MDF.

Cloth/leather includes hard packs, soft packs, and is divided into borders (similar to mountings), already covered (the borders are not exposed).

Parking folding room partitions:

1. If there is a door in the door, first turn the square hole on both sides of the door to rotate 180 degrees, loosen the upper and lower seals through the transmission wheel, and then close the door in the door;

2, open the last screen of the telescopic aluminum plate and the upper and lower seals;

3. Retract the telescopic aluminum plate of the last screen so that its distance can at least turn the distance of the screen, generally about 140mm; 4. Push the screen to the position of the screen in the direction of the track.

4. After each group of screens is collected in the same way, press each two screens tightly to minimize the distance between the screens and the screens. If necessary, you can open the up and down motion seals of the last screen that is housed at the hidden plate so that it presses against the rails and the ground. This will prevent others from easily pulling the screen out.