Operable Wood Folding Movable Partition Walls for Office Soundproof

Operable Wood Folding Office Soundproof Movable Partition Wall

Description:
 

Sliding Room Dividers divide a room in minutes with single thickness 65 mm sliding panels. No heavy beams or bracing in the ceiling is required. The lightweight top guide track can even mount directly to a suspended ceiling. The floor track is easily removable so the floor is clear when the room divider is not in use.

Movable Wall has excellent acoustical properties. When it comes to sound insulation this Movable Acoustic Wall is the obvious choice, its sound insulation ranges from 37-53 decibels.

Movable Wall Panels runs smoothly along its tracks on ball-bearing trolleys and is very easy to operate, it is rigid, robust and has safety features that assist in its operation.

Feature:

1. No need floor suspension: There is no track on the floor, just install the track on the ceiling;

2. Stable and safe: It is stable and reliable after being cut off, and it is not easy to swing;

3. Insulation and energy conservation: excellent insulation performance, according to different seating rates, the large space is divided into small spaces to reduce the air conditioning power consumption;

4.High-efficiency fire prevention: The use of high-efficiency fireproof materials, good fireproof performance;

5. Beautiful and generous: any surface decoration, can be combined with the indoor decoration effect;

6. Retractable and flexible: The partitions move freely, promote flexibility, and one person can complete the entire process of partitioning;

Fix sliding partition wall:

Hold the screen with one hand, and put the handle in the hexagonal steel at the 1100mm side of the screen side material. Hold the handle and turn it clockwise by 180 degrees (or continuously shake).The telescopic seal inside the screen will pop up to fix the screen.

Insert the handle into the groove on the side of the screen, and pull the handle upwards to open the expansion screen inside the screen to fix the screen. After putting the entire group of screens, check if the screen is straight? Whether it is on the same plane as the rail, if not straight, retract the upper and lower expansion seals to adjust until the screen is straight.

 
Technical information:

  
Sound insulation:
 

The sound insulation coefficient of partitions comes from many directions, not only in the partition wall itself, but also in other links, as follows:

1. Horizontal sound insulation

In order to achieve the best sound insulation, two layers of sound-absorbing rubber structure are used. Using the jack principle, the double rubber strip is pressed against the ceiling track and floor to provide a high stability of the active partition.

2. Corner sound insulation

The use of specially shaped rubber-like corner elements solves the technical problems of handling corner seals; at the same time, superior stability and sound insulation are achieved.

3. Vertical sound insulation

All the soundproof walls are made of highly elastic vertical contact side, concave and convex groove close fitting principle, to ensure the best closure and sound insulation.

4. Skeleton

In view of the hanging structure of the wall plate, it can be freely shaken, and the metal hoop elements between the wall plates are closely combined, effectively blocking the sound transmission. Panels can be replaced as needed for interior design without damaging the entire panel.

Advantage:

Long-term use: with more economy and higher decorative, beautiful and safe, will not scratch the skin.
Cost savings: installation does not affect the construction of smallpox and the ground.
Various forms: optional with a variety of occasions partition wall, can be customized according to customer requirements.
Easy combination: in the re-assembly can make full use of building materials.
Material environmental protection: selection of high-quality melamine particleboard, sound insulation and sealing a good variety of accessories a variety of options.