Temporary Operable Sliding Partition Walls Retractable Aluminum Frame

Sliding partition walls contruction:

Sliding partition wall panels are of double skin construction with a robust internal aluminium frame.The panel faces are not hard fixed to the frame and therefore when sound waves hit one side of the wall the vibration caused is not directly transferred to the opposite face.Aluminium edge profiles may be concealed,or exposed to provide a trim.

Heavy duty rubber gaskets are fitted to the panel profiles ensuring maximum acoustic sealing to all surrounding surfaces.The highest levels of sound reduction are achieved by introducing rubberize bitumen membranes and mineral wool insulation to the core of each panel.

The rapid action mechanism,which operates the retractable seals, is designed to exert sufficient pressure to achieve the high levels of sound reduction offered.The retractable seals are designed to tolerate deviations in floor level and deflections of supporting structures.The tolerance limit is evaluated for each individual application.

Sliding partition walls usage

(1)Size of wall: all panels should be installed in accordance with the manufacturers recommendations.

(2)Cutting: all necessary hardware and accessories for a complete job installation are to be furnished by the contractor.

(3)Install the acoustic sliding partition walls panels: the installation of acoustic sliidng partition walls panels should be carried out in a sequence from the left to the right, from upside to downside, the panels are cut to fit on site, traditional woodworking tools are suitable for cutting the panels, if panels are cut using a fine tooth table saw the panels should be cut face up to avoid scratching and at a much slower speed to avoid any tearout or chipping.

(4)Fix on keel:

Wooden keel fixing using nails, staples or screws into prefixed timber battens on the sliidng partition walls via the tongue and groove joint.It also can fixing by:light steel keel.