Interior Commercial Folding Movable Wooden Partition Wall Panel Width 1230 mm

Sliding partition walls description:

There are many types of materials used to sliding partition walls. They mainly use melamine board as raw material, and they are also the most active partitions used in the office environment. Because the partitions of such activities are conducive to decoration and design requirements, they mainly introduce melamine here. Plate material active partition feature.

The sldiing partition walls of melamine board is mainly made of double-layered solid material. Its thickness specifications are 65mm, 85mm, 100mm. The frame adopts the qualified aluminum material of the national standard. The choices on are more varied and can be alumina itself. , white or silver gray, can also be freely sprayed according to need, Class A national fire safety standards, noise coefficient range: 37db-53 db.

The use of sliding partition wall is to highlight the overall function of the space area with the overall tone, using a simple and easy assembly method, so that the regional function between space and space increase and clear, throughout the space while highlighting the space Penalization, to show the overall pattern beauty of the overall spatial area.

Sound insulation details about the sliding partition walls

1. Horizontal sound insulation

In order to achieve the best sound insulation, two layers of sound-absorbing rubber structure are used. Using the jack principle, the double rubber strip is pressed against the ceiling track and floor to provide a high stability of the active partition.

2. Corner sound insulation

The use of specially shaped rubber-like corner elements solves the technical problems of handling corner seals; at the same time, superior stability and sound insulation are achieved.

3. Vertical sound insulation

All the soundproof walls are made of highly elastic vertical contact side, concave and convex groove close fitting principle, to ensure the best closure and sound insulation.

4. Skeleton

In view of the hanging structure of the wall plate, it can be freely shaken, and the metal hoop elements between the wall plates are closely combined, effectively blocking the sound transmission. Panels can be replaced as needed for interior design without damaging the entire panel.

5. Sound insulation material

The skeleton is filled with additional sound insulation materials to achieve different sound insulation requirements.