Folding Office Partition Walls Melamine Surface MDF Board Aluminium Frame

Melamine Surface Aluminium Frame Office Folding Partition Wall

Description:
 
Partition Walls is aluminum-framed operable partition is the most versatile operable wall constructed today. Partitions are a series of flat panels, approximately range from 500 mm to 1200 mm wide. They have a wide array of features and options to meet most design and budget requirements. Models are acoustically rated, available in 65 mm ,85 mm or 100 mm thick models, and in single, pair hinged configurations.

The movable partition is a kind of operable wall that can divide a large space into a small space or a small space into a large space at any time according to needs and has a general wall function. It can serve as a multi-purpose room with multiple functions.

The movable partition has the characteristics of easy installation, reliability, industrial production, fire prevention, and environmental protection.

Freature:
 
1. No need floor suspension: There is no track on the floor, just install the track on the ceiling;
2. Stable and safe: It is stable and reliable after being cut off, and it is not easy to swing;
3. Soundproof and environmental protection: sound insulation effect is good, the maximum sound insulation coefficient can reach 53dB;
4. Insulation and energy conservation: excellent insulation performance, according to different seating rates, the large space is divided into small spaces to reduce the air conditioning power consumption;
5.High-efficiency fire prevention: The use of high-efficiency fireproof materials, good fireproof performance
 
Technical information:

 

 
Operation:
 

(1)How to open a sliding partition wall?

All operations should be gentle and should pay attention to safety. Facing the screen station, use both hands to grab the screen and pull the screen in the direction of the rails; turn the screen in the direction of the rails.

After pushing the screen to its place, fix the screen. Tip: When pushing the screen to the intersection, you should pay attention to the direction of the rail, and then gently push the screen along the rail to the position where it should be placed.

(2)How to fix a sliding partition wall?

Hold the screen with one hand, and put the handle in the hexagonal steel at the 1100mm side of the screen side material. Hold the handle and turn it clockwise by 180 degrees.The telescopic seal inside the screen will pop up to fix the screen.

Insert the handle into the groove on the side of the screen, and pull the handle upwards to open the expansion screen inside the screen to fix the screen. After putting the entire group of screens, check if the screen is straight? Whether it is on the same plane as the rail, if not straight, retract the upper and lower expansion seals to adjust until the screen is straight.