Compliance Standards Conforms to Clause 3.2 of GB/T 5023.2-2008, Clause 3.2 of IEC
60227-2:2003, Clause 7.3 of GB/T 5054.1-2008, ISO 441-1:2005 and
other relevant standards. Scope of Application This equipment is designed for wire bending tests. The test
procedure is as follows: secure the test specimen onto the fixture
and apply a specified load. The fixture swings left and right
during testing. After a preset number of cycles, inspect the wire
breakage rate; alternatively, record the total swing cycles when
the wire loses electrical continuity. The tester features automatic
cycle counting and will halt operation automatically once the
specimen fails to conduct electricity. Main Technical Parameters | Parameter | Value |
|---|
| Test Stations | 6 stations | | Bending Fixtures | 1 pair each of R1mm, R2.5mm, R3.0mm, R4.0mm, R5.0mm, R6.0mm, R12mm
and R25.4mm | | Remarks | 6 pairs pre-installed on the machine; 2 pairs supplied as spare
parts randomly | | Swing Angle | Continuously adjustable from ±30° to ±90° | | Swing Speed | Adjustable from 10 to 60 cycles per minute (c.p.m) | | Total Counter | Programmable and counting range 1~999999, displayed via
high-brightness LED digital tubes | | Individual Counters | 6 independent counters with 1~999999 range, LCD display | | Load Weights | Standard 500g weights as specified in GB/T 5023; additional weights
available at extra cost | | Test Load | Electrical continuity monitoring | | Test Wires | Supports 6 test specimens simultaneously | | Wire Break Indication | Φ25mm flat-top high-brightness red LED indicator | | Mechanical Drive System | AC motor driving crank-slider mechanism via reduction gearbox | | Overall Dimensions | W870mm * D610mm * H820mm | | Power Supply | AC 220V, 50Hz, 10A | | Net Weight | 80kg |
|
