High-Efficiency Large Scale Scooter Horizontal Impact Testing Machine

High-Efficiency Large Scale Scooter Horizontal Impact Testing Machine

DESCRIPTION

This machine is used to damage the wheel or brake after the scooter or brake is impacted by foreign objects. During the test, the steel plate is struck at a certain load with a certain load to check the damage of the scooter. PLC control, the number of times can be arbitrarily set, the speed can be arbitrarily selected. The guide rail is thick and the collision site is thick.

STANDARD FEATURES

TEST RANGE OF SCOOTER

1. This consumer safety specification includes the following sections: establishing a performance requirement, test method and label requirements to reduce the risk to users of the scooter as described in the introduction.

2. The scope of use of this standard is to provide scooters for children aged 5 or above.

3. After this standard comes into effect, if the scooter can fully meet this requirement, the product can be described as fully meeting this standard through labels or other means.

4. The position used in this international standard is "inch-pound". The metric units provided in brackets in this international standard are for reference only.

5, the following preventive warnings apply only to part 7 test method: the purpose of this standard is not to find out all the security problems, any one is associated with its use. This standard in the user's responsibility is: before the use of the products, they must establish an appropriate safety and health habits, and decided to go to adapt to these constraints.

DYNAMIC STRENGTH TEST
1, in the middle of the pedal a producer on the regulation of maximum weight, if not provided maximum weight is 200 pounds, the product falls in a surface covered with plastic floor on the floor slab of the front wheel 6 inches off the ground, the rear wheels 12 inches off the ground, do 3 times. Then, in turn, the rear wheel 6 inches off the ground, the front wheel 12 inches off the ground, do three times, a total of 6 times.
2. Brake test
(1) hand brake
(2) the scooter on a smooth slope of 10 °.
(3) apply a 110-pound load in the middle of the pedals, with the spindle perpendicular to the true ground.
(4) apply 15 pounds of force to the handbrake lever at the position recommended by the manufacturer.
(5) observe and record any movement.

WHY CHOOSE US?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2. Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3. Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4. Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.