BT50 - DCM25 - 100 Series Power CNC Tool Holders High Performance

BT50 - DCM25 - 100 Series Power End Mill Holder High Performance

Product Description:

It reduce the clocking resistanced and also show best performance on heavy cutting.

The tool holder uses four layers with 220pcs of roller pins arranged in particular
 
The usual length of power milling chuck show that the highest runout accuracy can reach to 0.005mm.

Collet Type:SC25,SC32,SC42

Fit:Generic

Hardness: 56-58 HRC

Material: JIS SNCM220

Use on milling and drilling

Taper tolerance:<AT3

Carbon depth: <0.8mm

Surface Roughness: Ra<0.005mm

Max run out: <0.005mm

Shank body standard: MAS 403 and B6339

Pre-balanced by design (8000rpm/G6.3), Through tool holder coolant capability 

Fine balancing can be customed on demand (12000rpm/G6.3 ,  30000rmp/G2.5)      

With through hole for internal and flange coolant (AD/B) design can be customed on demand

USE:

For clamping tools with cylindrical shank in Collets according to DIN 6499

Included in delivery: Clamping nut.

Please guarantee that the clamping the tool hangs extends is short

Product Advantage :

Good Surface finish , Increased feed rate

Layers with high heat resistance , can be high-speed processing

Grain size carbon tungsten has high toughness, ALTIN coating , high wear-resistance , special use for high speed cutting of CNC milling machine , also can increase the smoothness , reduce the rubbing coefficient m and improve the lathe efficiency m save more production time  

Tool Rigidity and good chip discharge , the most suitable for high-precision three- dimensional mold machining.

Factory dvantage:

More than five years production experence

Have more than 20 sets of CNC machine center

Large in stock qty

Made from 100% virgin raw material

Everyone goods go through strict quality inspection 

Specifications:

Products display: