Compact Controller Elevator Electrical Parts With 20 Axes Synchronized Control

Compact Machine Controller With 4, 8 Or 20 Axes Of Synchronized Control

Overview

MP3300iec is a compact machine controller with 4, 8 or 20 axes of synchronized control.
IEC Programming Environment and Controller-Centric Commissioning using MECHATROLINK-III motion network

One software platform

• MotionWorks IEC, allows efficient programming and handling of applications within a standard IEC 61131-3 environment
• Advanced camming and gearing functions
• The MECHATROLINK-III open Ethernet based motion network (100 Mbps) enables machine configuration from a single location with one software tool. Using self-tuning abilities of a servo system commissioning time is greatly reduced.
• Open standards EtherNet/IP and Modbus TCP to connect to many HMI and PLC in the market
• The controller can operate local amplifier outputs. This reduces panel cost and space requirements when just a couple of outputs are necessary.
• Libraries enable importation of previously developed logic

A Multitude of Options
Choose from ten option cards offered for the expansion slot to accommodate most machine requirements.

Technical Details

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.