Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
|
Detailed Product Description
|
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
1. Speed limiter Endurance Tests Endurance tests on speed limiter device should
be carried out as per the following procedure and conditions
specified. The device shall work satisfactorily during the tests
and shall meet the performance requirements as given in 8.3. after
the test.However, if any breaking down of the device occurs during
one of the endurance tests, a second device can be submitted to the
considered endurance tests at the manufacturer's request. The speed
limiter device should be mounted on a test bench simulating the
attitude and movement to simulate the vehicle conditions. |
| Color | Black | Application | free android and IOS app |
| Input Fuse | 5A | CPU | TI:MSP430F5419(100MHz) |
| Battery | Lithium battery :400mA( working time is about 3.5 hours) | Warranty | 2 years |
| Item Name | Top selling shine | Function | camera gps fleet tracker |
| Working Temperature | Anna Shi | MOQ | 5 Pieces |
| Recording and tracking |
| GPS Module | GPS chip set: SiRF Star III Frequency: L1, 1575.42 MHz Number of Channel: 20 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
| General requirements |
| Input I/O | 8 I/O input/output Port 1 main power check 1 port use to check the engine ( ACC check) 1 port use to SOS 1 analog Input port( Fuel sensor) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software) |
3. Speed Limiter Requirements
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
- The speed limiting device shall be so designed, constructed and assembled so as to resist vibrations, corrosion, dust, humidity, petrochemicals and aging phenomena to which it may be exposed;
- When the vehicle, running at its set speed and with the driver's
accelerator at its position of maximum travel, is subject to an
accelerating force due to a down gradient,the limiter shall control
speed by restricting the engine power to the limiter's minimum
engine power control setting; - The road speed limiting device shall be designed and constructed in such a way that it can be fitted in a place not easily accessible
- The actuation force of the controls should not have a detrimental effect on the driver's efficiency or impose fatigue on the driver;
- Speed limiter device shall have geo-fence management feature;
- Speed limiter device shall remotely communicate through telecom infrastructure
4. Safety requirement
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
- All cable or harness connectors in the speedometer circuit shall be wired and sealed. All connections shall be soldered and insulated with a flame proof insulation tape of adequate length of such a color as to blend well with the rest of the vehicle wiring;
- The speed limiter function or the Speed limiter device shall operate satisfactorily in its electromagnetic environment without unacceptable electromagnetic disturbance for any other device in the environment.
- The speed limiter device shall pre-warn the driver, by way of a high frequency buzzer, optionally flashing light signal can be used that the set speed is being reached.This warming shall occur at 5% prior to the set speed and shall continue buzzing once the set speed is achieved/ exceeded;
- When the set speed is reached, the speed limiter device shall temporarily cause the engine to lose power.Engine power shall be reinstated at a speed not less than the pre-warning switch point,which is 5% below the set speed
5. Technical Parameters:
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
| Item | Parameters |
| Overall Size | 20.0 X 9.2 X 4.5 CM |
| Host Net Weight | 0.4 KG |
| Processing chip | STC |
| Speed Limiting Zone | 20-200 Km/H |
| Speed Limiting Deviation | ±5Km/H |
| Mechanical Bearing Capacity | 400N |
| Working Voltage | 9-36 V |
| Rated Power Consumption | <0.3 W |
| Working Current | <60 mA |
6 Set Speed Limiter GPRS user name and password
Some country must be set GPRS user name and password for GPRS communication. The format of set GPRS user name and password is “user + space + GPRS user name + space + GPRS password”. For example, “user name 123456”, “user” is command, “name” is GPRS user name,“123456” is GPRS password. After send SMS, tracker will reply “Set GPRS User and Password ok . ” .
Related Products
|
GPS GSM GPRS Car Speed Controller Ethiopia Standard Vehicle GPS Speed Limiter |
|
Extension Wire Car Speed Limiter Ethiopia Standard ES 6413 Anti Jamming |
|
GSM Ethiopia Arm Chip Vehicle Speed Limiter Truck 1000mAh Car Tracking Device |
|
Ethiopia Motorway Speed Limiter Fleet Management Speed Governor |
|
Speed Limiter For Truck Bus Over Speed Control Real Time Tracking With Gps Tracker |
|
Ethiopia Standard Gps Speed Governor 1900MHz SGS 200Km/H ACC |
Email to this supplier