Waterproof Container GPS Tracker 15000mah Long Battery Padlock GPS Tracker

 Disclaimer:

• Read this user manual carefully please. When you start use this product, then you are deemed to have read this user’s manual.
• This Product used as assistant tool for Security only, can’t prevent all kinds of deliberately theft or malicious damage vehicles. For the safety of your assets, you still need keep necessary vigilance and security awareness after you installed this product. We do not bear responsibility to any loss except product itself. Thanks!

1. Product Introduction

AT10 Lock tracker combined with positioning, monitor and observe, the main applies to container, trucks and other transportation object location and tracking services.

AT10 lock tracker fully supports the GPRS network data transmission function, GPRS platform can be combined with software to make it more widely used in large-scale cluster monitoring, transportation management and many other fields.

Product Features:

• Backup battery low power alarm.
• Build-in GSM/GPS antenna.
• Support GPS real-time tracking(platform support).
• Support GPRS network data transmission.
• Lock ON/OFF alarm.
• Lock-string tamper alarm.
• Rechargeable battery.
• Support sleep mode.
• Remote upgrade by OTA.
• Build in with magnet.
• Unlock with RFID card(max support 10 RFID card).
• Unlock with SMS command(with unlock password).
• Support 25 Geo-fence.

5. Device Installation

Before you start install the device, Please check the product you get with the packing list, if you have any problem please contact us or distributor in time.

5.1 Prepare works

•  lock tracker
• Local GPRS SIM card
• RFID card

5.2 SIM Card Installation

This device need install a SIM Card, which must have GPRS data transmission and SMS function. In default setting, this device will use around 5MB~20MB data flow, please select suitable package.

Note:

• Do not install SIM Card in opposite way.
• SIM Card must open GPRS data transmission function
• Confirm the SIM Card have enough balance inside.
• Test SIM card by cellphone to check if it can connect network
• Please do not remove or insert SIM Card without power off, to avoid the damage to SIM card and device

5.3 RFID No. White List

• Set by Tool “GPS Tracker Configuration Tool”.
• Set by command(Please check at command list for details).

5.4 Lock ON

Just insert the lock wire into the hole, the lock hole will detect wire by AUTO, after been detect will be lock on, and device will beep once.

5.5 Unlock

• Unlock with RFID card

Swipe the RFID card at RFID reader position for 1-3s, when you hear the beep sound, means unlocking, after the sound end, then you can pull the lock wire out;

• Unlock with SMS command

Waterproof Container GPS Tracker 15000mah Long Battery Padlock GPS Tracker

After you send the command, when you hear the beep sound, means unlocking, after the sound end, then you can pull the lock wire out.

6. Setting Commands (SMS)

To make the device work on GPRS mode together the control center software system, we have to set some parameters to make the device know where and how to connect the server.

The following parameters must be set before you use this device:

• Server IP and Port (No.1 in table)

Device must have a server to upload the data to; in default it is set to our server IP and Port, if you use your own server, tell us before you place an order. The setting command is No.1, for example: AS1234*269#1,59.188.20.77,5577,0#

(In that command,”59.188.20.77” is the IP, “5577” is the port, “0” is UDP and upload self-def2.)

• APN (No.3 in table)

Full name for APN is Access Point Name, which should be given when you buy a GPRS SIM Card. It is offered by GSM network supplier, like China Mobile public APN is CMNET.

It is consists of 3 parts: APN, APN user name, APN password. Some of the GSM operator do not have APN user name and APN password, just leave it blank.

• Device parameters checking (No.6 in table, Optional)

The following is a SMS command list, with it you can set or get information you need.

8. FAQ

8.1 Show offline in Software Platform

Check if the device LED indicator shows normal. If device is not beside you, use telephone to check. Call the SIM card telephone you inserted in device, and make sure the SIM card is working.

8.2 All the devices show offline in Software Platform

Check the software platform server part, if it works normal contact with your GSM network operator. If both server and GSM network have no problem, then contact us.

8.3 Device do not get correct position

First time get position will take longer time (around 1~2 min), please drive to a wide area to get position. If it takes long time and do not get correct location, please check if the device install position is correct and no metal shield above it.

8.4 Device do not get GSM network

Make sure the SIM card has money/enabled GPRS, and was correct installed, and make sure the device not in a GSM signal blind area (such as underground garage).

Applications:
 

1.  Vehicle Rental / Fleet management etc 

2.  Container/cargo/asset tracking 

8.Trouble shooting

8.1The device is not online or offline on the web platform

8.1.1First, please check the three LED working state. Ifpossible. You can call the device’s number to check.

● If not connected, the device is out of signal. If the GSM signals cannot reach your location, pleasedrive to the open sky.

• If reminding the device SIM card is out of deposit, please make deposit by the telecom operator.

● If you can connect to the device when calling, the SIM card has deposited and please check with your operator for GPRS function. You also can check by searching the internet on your mobile phone.

● If reminding the device is power off, please turn back the device and proceed as followings:

a)Check if the red LED is in constant glow. If the LED is dark, please check the power connecting. If fuse is broken, please return the device to the seller.

b)If the blue GSM LED is not in constant glow, please check the installation of SIM card.

8.1.2 Please check the offline area in order to judge if the network problem of operators.

8.2 When GPS cannot receive the signals, please drive in the open sky and ensure there is no metal thins on the device.

8.3 When the device cannot receive the GSM signal, please check the SIM card installation. If the GSM signals cannot reach your location (such as the basement), please drive to the open sky.

8.4 The red LED is not glow when power on. Check the fuse of the power line. If the fuse is fused, please change the fuse with the seller.

Gurantee:
 
1. All of our product is free to use the Tracking service server in 24 hours each day
2. All of our product there is a 2 year quanlity assurance.
3. Sample fee will not  be returned.