1~1.5W gray color Resistant to tears and punctures thermal
insulation materials for the battery of electric car
The TIS™800K Series products is a high thermal conduction and dielectric performance
insulator pad
consisting of a ceramic filled low melting point compound coated on
MT Kapton film.
At 50℃, TIS™800K Series begins to soften and flow, filling the
microscopic irregularities of both the
thermal solution and the integrated circuit package surface,
thereby reducing thermal resistance
Feature
>Highly compliant surface characteristic
with high thermal conductivity
>High thermal conductive and High dielectric strength
>Low thermal resistance with high voltage isolation
>Resistant to tears and punctures
Application
| Power conversion equipment |
| Power semiconductors:To packages, MOSFETs & IGBTs |
| Audio and Video components |
| Automotive control units |
| Motor controllers |
| General high pressure interface |
| Power supplies and UPS |
| Motor and engine controllers |
| Televisions and consumer electronics |
| LED Power Supply |
| LED Ceilinglamp |
| Monitoring the Power Box |
| AD-DC Power Adapters |
| Rainproof LED Power Supply |
| Waterproof LED Power Supply |
| Piranha wroof and common LED module |
| LED module for Channelletters |
| Typical Properties of TIS™800K series |
| Product Name | TIS™804K | TIS™805K | TIS™806K | Test Method |
| Color | Light Amber | Visual |
| Composite Thickness | 0.003"/0.762mm | 0.004"/0.102mm | 0.004"/0.102mm | ASTM D374 |
MT Kapton
® Thickness | 0.001"/0.254mm | 0.001"/0.254mm | 0.002"/0.508mm | ASTM D374 |
| Total Thickness | 0.004"/0.102mm | 0.005"/0.152mm | 0.006"/0.152mm | ASTM D374 |
| Specific Gravity | 2.0 g/cc | ASTM D297 |
| Heat Capacity | 1 l/g-K | ASTM C351 |
| Tensile Strength | >13.5 Kpsi | >13.5 Kpsi | >17.8 Kpsi | ASTM D412 |
| Continuous Use Temp | (-58 to 266℉) / (-50 to 130℃) | *** |
| Electrical | |
| Dielectric Breakdown Voltage | >3000 VAC | >3500 VAC | >6000 VAC | ASTM D149 |
| Dielectric Constant | 1.8 MHz | ASTM D150 |
| Volume Resistivity | 3.5X1014
Ohm-meter | ASTM D257 |
| Flame Rating | 94 V0 | equivalent UL |
| Thermal | |
| Thermal Impedance@50psi | 0.12℃-in²/W | 0.16℃-in²/W | 0.21℃-in²/W | ASTM D5470 |
Standard Thicknesses:
0.004"(0102mm) 0.005"(0.127mm) 0.006"(0.152mm)
Consult the factory alternate thickness.
Standard Sizes:
10" x 100"(254mm x 30.48M)
Individual die cut shapes can be supplied.
Peressure Sensitive Adhesive:
Peressure Sensitive Adhesive is not applicable for TIS™800K series
products.
Reinforcement:
TIS800K series sheets are Kapton® reinforced.
Introduction video of Ziitek company and products:
https://youtu.be/kMI6E0nXjGk
