Stainless steel ratchet tool
Ratchet Type Stainless Steel Strap Banding Tool for cutting and
tightening | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: | P/N | ZCSSRT-01 | Product Material | Galvanized steel | Product Size | 430*190*18mm | Bearing Tensile | 20 KN | Per Weight | 1780 g | Packing Specifications | Carton Size:46*27*20cm Weight:218 KG | Single Box Quantity | 10pcs/Carton | Application | Fiber optical systems | Brand | HELLOSIGNAL® OR OEM | MOQ | 10pcs | | | | | | | | | | | | | | | | | | | | | | | | | | | | Applicable steel strip: | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description: | ● Stainless steel banding strapping tool Use high-quality steel as
the main body,It used to safely secure stainless steel strapping
using wing seals to sign posts, cables, duct work and packages.
This heavy duty banding tool winds the banding around a slotted
windlass shaft to develop tension. The tool is fast, reliable and
features a cutter to cut the strap before it is pushed down between
the wing seal tabs. The tool also features a hammer knob to hammer
down and close the wing - clip ears / tabs. Use with strap widths
between 1/4" and 3/4".
● Ratchet Type Stainless Steel Strap Banding Tool is designed and
applied for the stainless steel banding strapping,wing seals and
buckles etc,that we offer,working as both a tightener and a cutter
with easy handling. Whether you are using banding with
buckles,strapping with wing-seals,or a combination there of,the
stainless steel clamping system is applied using purpose
manufactured clamping tools.Most of these tools are unique to the
stainless steel clamping system and allows for the installation of
strong,durable stainless steel clamps that will remain intact for
years to come. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instructions: | | Instructions Drawing: | | 1.Cut the required steel strip (the length is equal to the
circumference+15-20 cm)
2.Put a stainless steel latch on a steel band 5 cm from the edge,
ears up.Bend the end of the strip down and place it underthe latch.
3.Wrap the steel strip around the lock catch,and pass the free end
of the steel strip through the lock
In the opposite direction of the bending end,manually tighten the
steel strip, and unscrew its loose.
4.Put the tool on the free end of the steel strip,hold the steel
strip with your hand,
and put the steel strip into the guide groove of the tool
head.Install the tool close to the lock catch. Release the
retaining arm with the retaining tool.
5.Turn the handle clockwise to tighten the steel strip to the
required tension.
6.Turn the tool to bend the steel strip to one side of the
latch,and then move the handle to one side.
7.Use a hammer to screw the end of the steel strip between the two
ears of the lock catch,and then screw the two ears of the lock
catch above the steel strip,so that the steel strip is fixed in e
catch end from the buckle by 90°.to cut the steel strip.tight
position. |
|
