Automatic Fabric Air Permeability Tester Textile Air Permeability Testing Machine

Test procedure

• Choose nozzle suitable for fabric, test area (generally 20cm^2) and pressure drop. Set parameter, calibrate, clear. Pressure drop for garments use is 100Pa, and for industry use is 200Pa. if the mentioned pressure drop can be reached or unapplicable, you can choose 50Pa or 500Pa after negotiation, or test area can use 5 cm^2, 50 cm^2, 500 cm^2 (if you use other test area, it should be stated in report). If you want to compare the test result, same test area and pressure drop should be adopted.
• Sample setting circle is chosen to mount on test bench; nozzle is chosen to mount into air measured cup.
• Machine is power-on.
• Press “Set” to set nozzle No. when the indicator light is on at the top left corner of nozzle number-displayed screen. Press “Set” again to set test area when the indicator light is on at the top left corner of air permeability/pressure drop displayed screen. Press the button again to set pressure drop of two sides of fabric when the indicator light is on at the top left corner of pressure drop displayed screen. Then press “Set” to quit.
• Sample is placed on the testbed, with straight pressure ring pressed and pressure handle pulled press it tightly. In the moment the sample fixture is installed well, press “Start” to start the test (During the test processing, pressure difference is shown on the air permeability volume displayed screen. The pressure difference should be “600~3300” when it achieves set value as displayed on pressure drop screen. Otherwise, nozzle or test area should be adjusted until it is in this range, but in general, size of nozzle is adjusted). When the pressure difference achieves the set value, air permeability will be shown automatically on the screen of pressure drop, and then the machine will stop automatically. Data of air permeability rate are recorded.
• After finishing the test, pushing down the pressure handle and pushing the ball on the handle toward inside, the handle is lifted, loosening sample pressure head to change the sample to do another same test. Under the same conditions, different parts of the same sample should be tested repeatedly for at least 10 times, recording it and calculating its average value

 
Service and Support
      Our company focuses on research and development , we were produced some intelligent testing equipments over thirteen years, we continue to provide stable performance, high-quality equipment for product quality testing industry.At present, the company has 14 utility model patent technologies,2 patents for invention and participated in the drafting and formulation of nine national standards.
      In cooperation we has a variety of testing units, industries, association partners and friends, accumulated a large number of detection industry insights and contacts, for those friends who just come into testing industry, we can learn from each other to communicate, explore the problems and difficulties encountered in testing.