30m Swing Gate Operator 260W Remote Control 4G GSM Swing Gate Opener
|
|
30 Meter Remote Control Distance 120° Open Angle Villa 4G GSM Swing Gate Opener
PRODUCT FEATURES
1) Used for articulated arm swing gate
5) Single door mode
6) Support Electronic lock, photocell, alarm lamp
7) Standard configuration: 2 motors, 1 control box with board, 2 transmitters, 1 release bar, 2 crank arms, 2 connecting rods
8) Optional accessories: alarm wall lamp(20V/220V/110V), photocell, wireless keypad, wireless wall button
PRODUCT SPECIFICATIONS
Installation guide
PK400AC swing gate opener is applicable to single leaf gate weight less than 400kg, and length of the single leaf swing gate should be less than 2.5m. The drive mode adopts the worm and worm gear to combine the pinion transmission. This gate opener must be installed inside the enclosure or yard for protection.
Installation drawing for main engine
The two engines are respectively installed at both sides of the gate and the Figure 6 shows the installation relation between the housing, main engine and mounting plate. The main engine at the left hand is taken as an example for detailed description of installation method and can be a reference for the installation method of the right one.
Preparation work before installation
a) Before installing the door opener, please confirm the correct installation of the door to ensure that the door can be easily manually operated. Dismantle the plastic cover on the main engine and mounting base plate before installation and keep the relevant fasteners properly;
b) Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If not install the electric lock, the distance between door bottom and ground should be ≥20mm.
Cable
Please prepare the fasteners for connecting mounting plate and wall according to the installation environment, and the power cable for main engine (the number of each single engine power supply cable core shall not be less than 4 PCS, the sectional area of cable core shall not be lower than 1.5mm²), the limit switch cable for main engine (the number of each single engine limit switch cable core shall not be less than 3 PCS, the sectional area of cable core shall not be less than 0.75mm²), the power cable for control box (the number of cable core shall note be less than 3 PCS, the sectional area of cable core shall not be less than 1.5mm²). The length is determined by the user of according to the situation in the installation site. Note: The pipe outlet should be facing down to avoid rain water entering the pipe along the cable.
Mounting brackets fixation
In order to install the PK400AC main engines firmly, recommend to use the expansion screws to fix the mounting brackets.
FOR MORE DETAILS, PLEASE CLICK THE BELOW LINK TO DOWNLOAD THE USER MANUAL.
|
||||||||||||||||||||||||||
| Product Tags: 30m Swing Gate Operator 260W Swing Gate Operator GSM Swing Gate Opener |
|
Compact Structure Swing Gate Operator for Smooth Operation and Low Noise Remote Control Included Max Door Weight 400 KG |
|
SW-400DC Worm Gear Copper Motor Heavy Duty Swing Gate Electromagnetic Door Opener |
|
SW200DC Automatic Swing Gate Motor Piston Type Screw Driving Modern Design for Villas and Warehouses |
|
200kg / Leaf Swing Gate Motor 2cm Per Second Rolling Code 433.92MHz |
|
Modern Heavy-Duty 300 KG Single Leaf Automatic Swing Gate Door Opener Inward Outward Villa Entrance Motor Closer Automatic |
|
24V DC Telescopic Motor Remote Control 300KG Capacity Hands-Free Door Opener for Villa Garages & Swing Gates Modern Design |