Cold Rolled Steel Car Parking Lock 6 Sec 20m Wireless Vertical Lifting

20 Meter Wireless Remote Control Distance Vertical Lifting Type Parking Lock Device

PRODUCT DESCRIPTION

The remote control parking lock can protect your parking space from occupying. When the owners drive their cars to the parking, they can just press remote controller and the parking lock will automatically go down and the owner can park their cars in. When they leave, they press the remote controller and the parking lock will rise up and no one can park in the parking space. It changed the traditional way to get off the manual switch.It is easy to master technology with high quality of life.

TECHNICAL SPECIFICATIONS

MAIN FUNCTION AND FEATURES

1. Protect your parking place from being occupied. Easy to use

2. Battery charge for one time can use for about 3 months.

3. Circuit protection: with reliable MCU and IC circuit intelligent control

4. Durable: Bearing weight up to 5 tons, the heavy weight loading on it , it won't be out of shape and destroyed

5. Waterproof,rustproof

6. Reset function: when go down or go up, meet the resistance from the outside force, it 'll reset itself, going to the

original way, so that protect the control panel's function

7. Noise-free: bearing transmission design of the motor makes almost zero noise. It is beneficial for battery and motor

longevity and lesser friction

8. Theft-proof: the mounting bolts are installed inside of the cabinet. No one can open it without key

9. Easy installation: four prepared holes at the bottom of the cabinet makes it easy to install.parking lot

10. Manual operation: to operate the parking locks rising and going down manually with manual at emergency situation.

11. Alarm function: when overloading, over voltage and coming across hamper

12. Feasibility: suitable for all parking place and all kinds of car.

Pack List

1 x SN-BW-3 unit

1 x Charger

2 x Remote Controls

4 x Tamper-proof bolts 50mm

2 x Keys for control box

1 x Operation Manual

Operation

1. On the remote control, press the up square button to make the Parking Lock stand up. Press the bottom button

to make it lie flat.

2. When the battery is low on charge, an audible alarm will sound on the unit or it will not operate. Open the control

box with the key and unplug the plug from the socket by pushing the release. After removing the flat battery, connect

it to the re-charger (supplied). This must be plugged into 220/240 volt power. After 12 hours the battery will be fully

re-charged ready for operation.

3. When the battery is fully charged, the expected use is 300 operations or approx. 3 months assuming 2 lifts and 2

downs per day.

4. In case of an emergency and the unit is standing up and will not operate, use the hex key (supplied, it’s a good idea

to leave this key and key of the main box in your car), to open the main box and to undo the screw. The pin will then

be released. Remove the pin and lay the whole unit down.