Brushless Motor Access Control Turnstiles Anti Pinch 550mm Width

Fingerprint Access Control Full Automatic Brush-Less Motor Sliding Barrier Gate Access Control System

PRODUCT DESCRIPTION

Sliding barrier gate is one of the passage management equipment, mainly used for pedestrian passage management;

it has the characteristics of fast opening, safety, and convenience, and is an ideal management and grooming device

for high-frequency pedestrian access; it has been widely used in airports, subway stations, and stations , Docks, sceni

c spots, parks, student dormitories, unit pedestrian passages, etc., can cooperate with smart cards to realize off-type

ticketing management system functions and form unattended management of personnel entry and exit. Basically

composed of a main box and a movable wing board, it has a blocking function for unauthorized personnel

TECHNICAL SPECIFICATIONS

PRODUCT FUNCTION AND FEATURES

1. Fault detection and alarm functions, easy to use and maintenance

2. The running status can be programmed and controlled with the built-in keyboard on the main board

3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working

automatically within the prescribed time and reset again after the default delay (till fully reset)

4. Anti-breakthrough function. The gate is locked automatically until opening signal received

5. Support infrared photocell for anti-pinch and reset function

6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),

the system will cancel the authority of the current user automatically

7. Gate can be set as normally open or normally closed

8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller

needed)

9. Direction can be set as single-direction or bi-direction

10. LED direction indicator

11. Gate auto opens when power off and auto close when power on

12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.