RS485 TCP IP Glass Barrier Gate DC24V BLDC Turnstile Entrance Gates

RS485 TCP/IP Interface Slide Type Body Height Glass Barrier Speed Gate

PRODUCT DESCRIPTION

The Sliding Barrier Turnstile Speed Gate offer a reliable and efficient method to ensure only authorized users

are allowed access to each area of a building. It is an attractive swing turnstile that is easily capable of handling

high volume and abusive conditions. The compact unit makes it simple to construct a multiple lane set-up while

the variety in colors allows you to match this turnstile perfectly to your lobby or branding.

The blocking body (gate wing) has a large area and a large blocking height, which is perpendicular to the

ground and realized by telescoping Stop and release. The material of the sliding gate is commonly used acrylic,

plexiglass, tempered glass, etc.

PRODUCT FUNCTION AND FEATURES

1. Fault detection and alarm functions, easy to use and maintenance

2. The running status can be programmed and controlled with the built-in keyboard on the main board

3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working

automatically within the prescribed time and reset again after the default delay (till fully reset)

4. Anti-breakthrough function. The gate is locked automatically until opening signal received

5. Support infrared photocell for anti-pinch and reset function

6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),

the system will cancel the authority of the current user automatically

7. Gate can be set as normally open or normally closed

8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller

needed)

9. Direction can be set as single-direction or bi-direction

10. LED direction indicator

11. Gate auto opens when power off and auto close when power on

12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.

PRODUCT SPECIFICATIONS

High lights of our products

The body is made from brushed stainless steel which creates a seamless and elegant access point to

blend into most indoor environment.

It can be integrated with any kind of access controller system (e.g.: RFID device, Push button, Fingerprint

and Biometric device).

In case of emergency, the Optical Turnstile arm will open automatically to allow free passage.

Optical Turnstiles are suit for elegant and luxury entrance solutions.