6M Arm 1.5 Sec 24v Dc 140w Automatic Barrier Gate

1.5sec 24v dc brushless 140w rated power motor fast speed parking barrier gate management system

Specifications of Automatic Barrier Gate

Technical parameters

1 Working temperature(motor): -35℃~+85℃

2 Rated voltage:DC24V

3 Running speed:1.5s-8s

4 Rated current:8.58A

5 Rated power:140W

6 No-load speed:1850rpm

7 Rated speed:1400rpm

8 Output Power:56.8N.m

9 Relative humidity:≤90%

10 Remote control distance:≤100M(in the open place)

11 IP Degree:IP54

12 Max length of arm: 6M

Features

1.The running speed can be adjusted from 1.5s to 6s

2. Open the barrier gate by motor wheel when power off, automatically reset after power on

3. Curved crank arm three- link movement structure, the operation is stable

4. Wireless remote control control open/close

5. Auto reverse function(force adjustable)

6. Infrared photocells connector is available

7. Loop detector connector is available.

8. Well-integrated with car parking system equipment,with wire control(must be switch signal)

9. Connector for traffic light(AC220V,power less than 40W)

Installation, commissioning and use

Equipment installation

Please select the correct type of barrier gate according to the specifications of

the pace,and then fix the barrier cabinet with expansion bolts. After determined the position,the barrier gate foundation should be done according to the site conditions,and also make the cast-in-place basement for the non-concrete ground.

Adjust the Position of Barrier Arm

To adjust the position of the arm (for example, after exerting excessive force), please take the steps as below:

*open the barrier gate door and remove the cover
*loosen the two fasten screws of the DZ-1 on the boom shaft with the M12's Allen wrench, so that the boom can be re-positioned by hand.
*adjust the position of the boom (horizontal position).
*Use the hexagonal wrench to tighten the two fastening screws (72 Nm)

The parameter for selecting the balance tension spring

PACKING LIST

RFQ:

Q: What's the order process?

A: Follow the steps on below to complete your order.
- 1. Inquiry
Provide us detailed information about your requirements, and we'll recommend the suitable products accordingly.

-2. Quotation
Official quotation form with all clear specifications according to the order

-3. Invoice
Proforma Invoice will be issued once the quotation is confirmed.

-4. Payment
Payment shall be arranged if the invoice is confirmed. Full payment needed for sample order; Volume order need to 30% deposit to start order and 70% before delivery.

-5. Production

Sample order takes 3 to 5 days
Volume order takes about 5 to 10 days (depends on order quantity)

-6. Delivery
By sea, air or courier. Detailed picture of package will be provided upon the service you've chosen. Packaging info will be sent before delivery.