RS485 6m 24GHz Parking Lot Occupancy Barrier Gate Radar Sensor

Product photo

Installation

1. Install on barrier gate

H=65CM, fixed radar sensor on barrier. Radar connects with DC12V power input, analog on and

off signal. Then power on.

2. Install on holder

Confirm the holder position, the holder must install at alongside of barrier. Fix radar at 65cm height

from ground. Radar connects with DC12V power input, analog on and off signal. Then power on.

Wiring

Brown color wire connects to 12V+, blue color wire connects to 12V-, green color wire connects to

loop detector port on barrier control board, yellow color wire connects to OV on barrier control board.

Adjustment

Note: Default detect road width is 3m, People and cars should be distinguished. There must be no

obstacles in the surrounding area, and people should not exceed the radar level.

Connect the equipment to the relevant line sequence, power on, short the blue and black wires for

1-2 seconds, and the equipment will enter the automatic background threshold collection function

(two LED display lights will start flashing, disconnect the blue and black wires). Before setting the

automatic background threshold, make sure there are no pedestrians or other interference in front

of the barrier arm.

Case reference