2 × 1.25G to 2.5G Gigabit Ethernet Media Converter , SFP to SFP

2 × 1.25G to 2.5G Gigabit Ethernet Media Converter , SFP to SFP

OFS-GAS-3

2×1.25G to 2.5G Gigabit Ethernet Multiplexer

The OFS-GAS-3 Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system’s transmits- sion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports.The multiplexer must be used in couples

Main Features

◆ Attach one 2.5G SFP module to SFP1 Cage on the Multiplexer. Attach two 1.25G SFP modules to SFP2 and SFP3 Cage on the Multiplexer.

◆ Link fiber from the SFP1 on one Multiplexer with SFP1 on another Multiplexer. It can link through CWDM system.

◆ Link fiber from the SFP2 and SFP3 on the Multiplexer to Gigabit Ethernet Service.

  Note: SFP2 on one Multiplexer link pass only with SFP2 on another Multiplexer. SFP3 on one Multiplexer link pass only with SFP3 on another Multiplexer.

◆ Connect the power cord to the Multiplexer and check that the Power LED lights up. The Px  LEDs will light when all the cable connections satisfactory.

Technical Specifications

Order Information