SKD11 Roller 1.2mm CAD Light Steel Frame Roll Forming Machine

High Productivity PLC Control Automatic Light Gauge Steel Framing Roll Forming Machine Cad Frame Roll Forming Machine

Main Specifications

1. The wall, floor and roof structure is produced automatically, saving design time.
2. Automatic 3D molding, insure 100% accuracy.
3. With analysis project function, the software can calculate bearing capacity.
4. Create frame work 3D map and 3D decoration view.
5. The whole building frame can be resolve to independent unit drawing.
6. Calculate the bill of material, including the needed steel, plates, thermal insulation material,doors and windows, screws and other matching material.
7. Create the processed data including the marked work piece, docking with the equipment.
8. Software maintenance and training fee.
9. Maintenance and supporting fee is USD 2200.00/Year. It’s for software update and optional.

Numerical control system

With independent intellectual property rights LGS Maker production control software can insure the system be used in all kinds of working environment with its industrial grade computer.

1. 17 inch color industrial grade computer can choose keyboard, mouse or touch screen operation. Switching manual or automatic function at will.

2. With different languages to choose in operation interface, it’s easy to handle output data in design software can be copy by USB or teletransmission by Internet.

3. Read design data directly while in production, without manual intervention.

4. Real-time monitoring whole production process by graphics, which can show which work piece is working, the length, pcs and material condition etc.

5. Monitor and control the production process with automatic fault detection and alarm system to protection.

6. Improve efficiency to add, modify or cancel the task at any time, no matter single rob piece or whole unit. It can solve the scrap problem caused by material defect or personal error.

7. Data is automatically saved after the machine shut down at normal case. Accidental power-off protection device is optional.

8. System is permanent free use with independent intellectual property rights.

Equipment description
 

1: Configuration of the machine

Uncoiler 1 set

Roll forming roller: 12 groups

PLC control system 1 set

Hydraulic cutting system: 1 set

Collection table

2: Working Process Flow of the omega profile forming machine

Uncoiling-Coil feeding-Guiding-Roll Forming-Punching (if needed) - Cutting-Collection table

3: Technical Parameters:

A: Power supply:

380V, 3 phases, 50 Hz (can be adjusted according to actual power supply conditions in different countries)

Main motor power: 7.5KW

Pump power: 5.5kw

B:Uncoiler:

Inner diameter: 460-520mm

Outer diameter: 1300mm
loading weight: 2T

C:Forming part:

Feeding thickness: 0.6-1.2mm

Feeding width: 50-500mm

Forming speed: 8-12m/min

Cutting Deviation: 10m±2mm

No. of Roller station: 12 groups

Roller material: GCr15

Material of shaft: Cr40

Diameter of shaft: 42mm

D:Hydraulic System:

Hydraulic pressure: 10-12 Mpa

Cutter material: SKD11

E:Control system:

Full-automatic NC-PLC control system

Control channel: Colored touch screen

Our machine photo