1 - 10 of 72
calibration block penetrant testing specimen
Selling leads
|
Calibration Block Penetrant Testing Specimen YM-A Aluminum Alloy Material Through the physical and chemical test type A block material for LY12 ...
2024-12-09 23:42:24
|
|
Calibration Block Penetrant Testing Specimen YM-B(B3) Depth 100μm Width Target Value 0.5μm Model:YM-B(B3) All linear dimensions to the requirements of ...
2024-12-09 23:42:24
|
|
... of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Material: Test Report according to ISO 10474-3.1.B,JIS G ...
2024-12-09 22:08:10
|
|
...used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the ...
2024-12-09 11:10:00
|
|
... material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is ...
2024-12-09 11:10:00
|
|
...calibration block Standard: ISO2400-1972E IIW test block (V-1 test block) is also called Dutch test block. It is an international standard test ...
2024-12-10 00:39:20
|
|
... plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The ...
2024-12-09 22:07:10
|
|
penetrant calibration block test block PT test specimen developer,remover Model:YM-B All linear dimensions to the requirements of AS2083/2005, BS2704...
2024-12-09 18:45:33
|
|
...Test Block,Calibration Blocks, Test Blocks, A2 UT Blocks, Standard Test Blocks Iiw,BS2704 Standard ISO2400-19 Calibration Blocks/Standard Test ...
2025-07-19 00:06:29
|
|
... material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is ...
2024-12-09 11:10:00
|