TG-50 Coating Thickness and Vibration three in one Electromagnetic
Ultrasonic Thickness Gauge TG-50 Electromagnetic Ultrasonic Thickness Gauge is a pen type ultra small, non-contact thickness measurement
instrument that does not require acoustic coupling agents. It can
achieve thickness measurement of metal or magnetic materials, while
also measuring the thickness of the coating layer on the outside of
magnetic workpieces. When the instrument is attached to the
workpiece, it can measure the vibration of the workpiece. Basic parameters: | Measuring range | 1-240.0mm | | Maximum lift-off distance | 3.5mm | | Detectable workpiece materials | Carbon steel, cast steel, alloy steel, stainless steel, copper,
aluminum, titanium and other conductor materials | Error range of measuring equipment | Workpiece thickness<10mm ,error 0.05mm Workpiece thickness>10mm , error +(0.01+H/200) mm (H is the
thickness of workpiece) | | Receiving gain | ≤100dB | Maximum measuring range of coating | 6mm | | Vibration measuring range | 0-156m/s2 | | The maximum tilt angle of the probe | ±25° | | Minimum diameter (curvature) of detectable workpiece | 6mm | | Probe field excitation method | Permanent magnet | | Type of sound wave | Shear wave | | Waveform display | Positive half wave, negative half wave, full wave, radio frequency wave, envelope wave | | Adjustment range of sound velocity of sound wave | 1000-9999 m/s | | High temperature compensation | With high temperature sound velocity automatic compensation
function | | Power supply | Built-in lithium battery, working time not less than 4 hours | | Low power mode | Support Gecko mode,Standby time can reach more than 20 hours | | The normal working temperature range of the host | -10~+50℃ | | Host storage temperature range | 0-+40℃ | | Host weight | 250g(with normal temperature probe) | | Host size | Length170mm× width 40mm× thickness 35mm |
Standard Configurations | Serial number | Name | Quantity | Remark | | 1 | Host TG-50 | 1 | | | 2 | Normal temperature probe | 1 | 4MHz,42mm*32mm | | 3 | Charging data cable | 1 | | | 4 | Charging plug | 1 | | | 5 | Manual & calibration certificate | 1 | | | 6 | Iron based test block | 1 | | | 7 | Aluminum based test block | 1 | | | 8 | Packing box | 1 | |
Optional Configuration(You can choose to order according to your needs, which is not
included in the standard configuration) | Serial number | Name | Quantity | Remark | | 1 | High temperature probe | 1 | 4MHz,Φ33mm*40mm | | 2 | Small diameter normal temperature probe | 1 | 4MHz,Φ13mm*36mm | | 3 | Large diameter normal temperature probe | 1 | 4MHz,Φ40mm*60mm | | 4 | Mobile phone | 1 | Support Android, HarmonyOS system | | 5 | Pad | 1 | Support Android, HarmonyOS system | | 6 | Wrist watch | 1 | Support Android, HarmonyOS system | | 7 | PC software | 1 | APP software |
Product Features: - Small size, easy to carry
- Low requirements for the surface of the workpiece, no need for
polishing treatment on rough surfaces, and non-contact measurement
can be achieved
- Insensitive to coatings, enabling thickness measurement of coated
workpieces
- No acoustic coupling agent is required, thickness measurement of
high-temperature workpieces can be achieved, and temperature
compensation can be performed
- 1.3-inch high-definition IPS circular LCD screen display, 360°
without blind spots
- 0.42-inch OLED screen, high brightness display acceleration
- Electromagnetic ultrasonic thickness gauge, coating thickness
measurement and vibration analysis three in one
General Characteristics: - The instrument consists of a host and a mobile phone, which are
wirelessly connected via WiFi
- The instrument adopts the principle of electromagnetic ultrasound,
and the inspection process does not require polishing the surface
of the workpiece and coupling agent
- The probe and host are integrated, and the probe can be replaced
- After connecting the phone and pad, there are two functions: A-scan
and B-scan
- Configurable probe types: probe (≤80℃, short-term measurement),
high temperature probe (≤800℃, short-term measurement)
- Configurable high-temperature handle: short handle (meets
measurement requirements up to 350°C, short-term measurement), long
handle (meets measurement requirements up to 800°C, short-time
measurement)
|
