HCDX-3000 AC Magnetization HWDC DC Function Movable Magnetic Particles Flaw Detector
|
HCDX-3000 AC Magnetization HWDC DC function Movable Magnetic Particles Flaw Detector
Movable Magnetic Particles Flaw Detector HCDX-3000 is applicable to detect workpieces by AC magnetization. It has the function of demagnetization, and do not need additional configuration of demagnetization set. 8-bit MCUis adopted as the controller by this magnetic particles flaw detector, and the continuous regulation of magnetizing current can be realized through the precise collection of the AC zero voltage crossing signal and the signal of current regulation. It has the function of maximum current limit. With the function of phase controlled, the detector is suitable for both continuous technique and residual technique.
The current value is displayed on the analog ammeter or digital ammeter. The prod sets and trigger button are for operating in the narrow space. The output current is reduced from the initial value to zeroautomatically when demagnetizing. Non-contact switch is adopted for the equipment. This detector can be connected to the prod sets (handheld electrode sets) or spiral cable (flexible coil). Also there are some coils or electrodes designed for this equipment to become a simple inspection machine tool as option. Configuration table:
Notes: “●”marked as standard, while “○”marked as option.
Characteristics:
Main functions: *Flaw detection method: strut method, winding method, coil method *Magnetization method: AC magnetization, DC magnetization (HWDC/FWDV) *Demagnetization method: AC demagnetization adopts remote demagnetization (attenuation method), and AC demagnetization adopts ultra-low frequency demagnetization Magnetization: use the two ends of the support rod to top the steel plate flaw detection area, and the support rod spacing is 0~500mm (adjust the spacing according to experience)
Or clamp both ends of the steel plate with wire clamps
Demagnetization: Wrap the whole part with a cable, with a pitch of about 20~30cm. Connect both ends of the cable with the flaw detector. The connection method is the same as that of magnetizing.
|
||||||||||||||
Product Tags: HWDC DC function Flaw Detector AC Magnetization Flaw Detector Movable Magnetic Particles Flaw Detector |
![]() |
HG3002 2 vibration channels +1 speed channel Color LCD Screen Vibration Vault Data Measurement Recording Analysis Meter |
![]() |
TG-M70C Magnetic Crawler Corrosion and Electromagnetic Ultrasonic Thickness Measurement Robot for Plate Wall Corrosion Detection |
![]() |
HUATEC High Precision Roundness Measuring Instrument High Accuracy |
![]() |
SRT-7150 Surface Roughness Contour Graph Profilometer Testing Machine |
![]() |
DR Flat Panel H1719HDA-GZ Sensor For Dental Imaging And Industrial Inspection |
![]() |
TG6105 Basic FM Probe Zinc Coating In Galvanized Iron Strips Coating Thickness Gauge |