TG-5800EX Explosive High Density Ultrasonic Thickness Gauge With Echo Echo Measurement

TG-5800EX Explosive High-density Ultrasonic Thickness Gauge with Echo-echo Measurement

General introduction

Ultrasonic thickness measuring instrument is the most suitable ultrasonic thickness measuring product. It uses a special waterproof and oil-resistant high-density plastic housing and rubber keys, and contains all the usual functions of ultrasonic thickness gauges. What's more, the instrument also has echo - echo measurement function. The substrate thickness can be accurately measured without removing the coating. If necessary, you can also pay to upgrade to higher version for data transfer, A/B scanning and other features

Technical parameters

Main Features

Automatic zero calibration

Automatically correct the system error

Can set up the upper and lower limit of out-of-tolerance alarm

High and low gain adjustable

Voltage prompt

Automatic shutdown

Large LCD backlight display

Suitable for measuring the thickness of metal, plastic, ceramic, glass and any other good conductor of ultrasound

Tested in a variety of flammable and explosive environments

Standards meet to

JJF 1001-1998　

JJF-1059-1999　

GB/T12064.1-1999　

GB/T11344-1989　

Main application

This instrument is suitable for measuring the sound velocity of metals (such as steel, cast iron, aluminum, copper, etc.), plastics, ceramics, glass, glass fiber and any other good ultrasonic conductor and used to judge the consistency of materials, can be widely used in petroleum, chemical industry, metallurgy, shipbuilding, aviation, aerospace and other fields, especially suitable for nodular cast iron nodulation rate and grade determination

Thickness measurement field:

The thickness of the paint can be 0.1 ~ 6mm (depending on the material and probe of the paint layer), and the thickness of the metal substrate can be measured from 2 ~ 300mm (depending on the material of the substrate, the thickness of the paint layer and the probe).

High temperature thickness measurement field:

Under the condition of surface temperature 400℃, it can measure 8 ~ 25mm. It can measure 200mm at the surface temperature of 250℃. An instrument with A-scan measurement mode can measure at least 100mm at 400 ° C. Thickness measurement at other temperature conditions, depending on the site.

Ultra-thin thickness measurement field:

The thinnest thickness can test down to 0.5mm, the thickest thickness can test upto 508mm (ordinary carbon steel), need to match different probes. Metal/non-metal can be measured (depending on the density of the grain structure of the material)

Special functions

1. With "Echo - Echo (E-E)" measurement mode, it is possible to measure "through paint layer" and "shield paint layer" and obtain the accurate thickness of the substrate under the paint layer

2. Large sound speed adjustment range (1000mm/s ~ 15000mm/s), large bandwidth (0.5MHz ~ 30MHz), so that any material (whether metal or non-metal) that can be penetrated by ultrasound can be measured

3. With the function of sound velocity tester, it can determine the effect of "cast iron nodulation rate" on site

4. Out of tolerance alarm, sound, light, vibration alarm. No matter the dark environment in the furnace, the tank, or the noisy environment in the field, the alarm signal will not be missed

5. Function keys can be exchanged left and right, especially suitable for high altitude narrow environment thickness measurement operation

6. Adjustable display frequency (4 times per second and 20 times per second), convenient scanning thickness measurement

7. Can match optional 500℃ (5MHz) high temperature probe

8. High impact resistance, waterproof and oil-proof housing, compact and portable