Ultrasonic Full Wave Ndt Flaw Detector 10 Detection Channel

High quality and high performance Various new functions ultrasonic flaw detector FD-600

Performance Features

1.Measurement displaying mode: type A displaying mode

2.It is provided with linear reject function, the highest reject is 80% of the screen height;

3.switch over arbitrarily among three detecting modes: single-probe , dual-probe ones and through transmission;

4.It has gate setting and alarming function. Can set the position and width of gate freely on the screen, and can set alarm for forbidden wave and loss wave respectively;

5.500 detecting channels are available with a separate detecting parameter and DAC curve in every channel.

6.500 A scanned images, parameters and DAC curves can be stored in

7.Two input methods, angles and K value.

8.Auto-gain

9.Automatic generation of DAC curve by standard test block, 30 points can be 10.recorded at most, three adjustable bias curves are generated with the function of Correction.

11.Automatic generation of AVG curve by three type of flaw

12.Make test videos and Auto playback

13.Auto shutdown mode to save power ;

14.Can playback the saved images, call out the saved A-scan images from

Equipped with delete function, with which any data can be deleted from storage zone;

15. Two measuring unit: mm/inch;

16. Real-time clock;

17.Auto-calibration of probe.

18.Memory of peaks.

19.Can freeze and defreeze waveform and detection parameters;

20. Can lock/unlock the system parameters;

21.Measuring of sound path and analyze of echo times;

22. Can indicate power state in real time;

23. RS232 communication port available;

24. Having buzzer prompt during operation;

25. Compact, light and easy to operate.