Large Screen LCD Eddy Current Inspection Equipment High Accuracy Simple Operation

HUATEC HEC-108 Metal Foil Resistivity Resistance and Conductivity Measuring Instrument Conductivity of Metal Testing Equipment

1. Main features of the instrument

• Measure the conductivity, resistivity, meter resistance and DC resistance of motor, transformer, etc. of the wire, pole and bar with the maximum diameter of 1-45mm.
• The resolution of the instrument is up to 10-8 Ω (0.01 μ Ω), which ensures the measurement accuracy of the resistance and conductivity of the metal conductor with the maximum diameter up to Ø 45mm (sectional area up to 1589mm2).
• Configure high-precision (± 0.1 ℃) temperature sensor or test fixture with high-precision conductor temperature sensor, greatly improving the accuracy of temperature automatic compensation in measurement.
• Combining advanced electronic, singlechip and automatic measurement techniques in one instrument, with superior automatic functions and simple operation.
• All measured numerical values can be obtained by just one press on the key without any calculation. The instrument is adequate for continuous, fast and accurate measurements.
• AC power supply design, suitable for field use.
• With large screen and font. Can display measured values and auxiliary parameters at the same time, including resistivity, conductivity, resistance, temperature, measuring current and temperature compensation coefficient.
• The functions of automatic constant current selection, automatic current reversal, automatic zero point correction and automatic temperature compensation are maintained for every measurement, to guarantee the accuracy of measured value.
• Special portable four-terminal measuring fixture is suitable for fast measurements of different materials and the wire/bar with different standards.
• The build-in data accumulator can record and save 1000 groups of measuring data and parameters. Connecting it to the host computer, the complete report can be generated.
• Built in data memory can record and save 1000 sets of measurement data and parameters, and connect the upper computer to generate a complete report.

2. HEC-108 Main Parameters

Optional fixture:

HJ-300 fixture: for Dia.0.1mm-10mm wire or rod.

HJ-150 fixture: for Dia.0.4mm-10mm wire or rod, multi corn cable, the maximum cross-sectional area of the material can be memorized, the maximum cross-sectional area of the material can be memorized

HJ-240 fixture: for Dia.0.1mm-18mm wire or rod, multi corn cable, the maximum cross-sectional area of the material can be memorized

HJ-630 fixture: for Dia.0.1mm-28mm wire or rod, multi corn cable, the maximum cross-sectional area of the material can be memorized

HJ-1200 fixture: for Dia.0.1mm-39mm wire or rod, multi corn cable, the maximum cross-sectional area of the material can be memorized

HJ-1500B fixture: for Dia.0.1mm-44mm wire or rod, multi corn cable, the maximum cross-sectional area of the material can be memorized

Calibration standard resistance:1mΩ, 10mΩ, 100mΩ, 1Ω, 1mΩ, 10Ω, 100Ω

Note: all workpiece to be tested, request the length not less than one meter.