Portable Roughness Tester Surface Roughness Measurement Equipment 22 PARAMETERS TFT TOUCH SCREEN SURFACE ROUGHNESS TESTER SRT-6680
WITH GRAPHIC Main Features - Mechatronic and ergonomics design, small size, light weight, easy
to operation
- The stylus drive unit can be stored within the main unit for
standard measurement, or separated from the display unit by using
the supplied cable which allows more flexible measurement in any
orientation. The driver can be separated and reattached in one
simple step.
- DSP chip control and data processing, high speed, low power
consumption
- 22 Parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk,
Rsm, Rku, Rmr, Ry(JIS), Rmax,RPc, Rk, Rpk, Rvk, Mr1, Mr2
- Measurement range up to 160μm (can be optional to 320μm)
- 3.5 inches color graphic TFT touch screen, wide viewing angle,
excellent readability and an intuitive rich display, it includes a
backlight to improve visibility in dark environments
- Can be operated using buttons or touch screen
- It provide Bluetooth Capability , support wireless connection with
mobile and mini printer.
- Built-in lithium-ion rechargeable battery and control circuit, high
capacity, no memory effect, it works over 50 hours while fully
charged, and there is remaining charge indicator, charging hint
- Large capacity data storage, 100 item of raw data and curves can be
stored
- Real-time clock setting and display for easy data recording and
storage
- With auto sleep, auto power off, power-saving features
- Reliable circuit and software design to preventing the motor stuck
- Language: Chinese and English switch freely
- All parameters or any of the parameters which set by users can be
printed
- Optional accessories: Bluetooth capability, curved sensor, pinholes
sensors, measurement, stand, extension rod, printer
- Portable Surface Roughness Tester SRT6680 complies with
international standards ISO, DIN, ANSI, JIS
Technical parameters Measuring Range | The Z axis (vertical) | ±80μm/±160 µm(enhanced model) | The X axis (Transverse) | 20mm | Resolution | The Z axis (vertical) | 0.01μm/±20μm | 0.02μm/±40μm | 0.04μm/±80μm | 0.08μm/±160μm | 22 Parameters | Ra,Rz,Rq,Rt,Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr,Ry(JIS), Rmax,
RPc, Rk, Rpk, Rvk, Mr1, Mr2) | Graphic | Bearing area curve, Roughness profile, Primary profile | Filter | RC,PC-RC,Gauss,D-P | The sampling length(lr) | 0.25, 0.8, 2.5mm | Assessment length(ln) | Ln= lr×n n=1~5 | Sensor | Measuring method | skidded | Stylus tip | Diamond, 90 cone angle, 5μmR | Force | <4mN | Skid part | hard alloy, skid radius of curvature: 40mm | Traversing speed | lr=0.25, Vt=0.135mm/s | lr=0.8, Vt=0. 5mm/s | lr=2. 5, Vt=1mm/s | Return Vt=1mm/s | Accuracy | Less than ±10% | Repeatability | Less than 6% | Power supply | Built-in Lithium ion battery, Charger :DC5V,800mA | Outline dimension | Main unit: 64*53*160mm drive: 23*27*115mm | Weight(main unit) | Around 380g | Working Environment | Temperature: - 20℃ ~ 40℃ Humidity: < 90% RH | Store and Transportation | Temperature: - 40℃ ~ 60℃ Humidity: < 90% RH |
Standard Delivery ITEM | QTY | SRT6680 Host | 1 PC | Sensor TS110 | 1 PC | Calibration block and bracket | 1 PC | Bracket for Calibration Block | 1 PC | Height adapter | 1 PC | Power Charger & USB Cable | 1 PC | PC Software | 1 PC | User manual | 1 PC | Instrument case | 1 PC | Warranty | 2 Years |
Optional Accessories Image | Description | Extansion rod | TS55 - Extending Rod, extending rod increases the depth for pickup to enter the part.
Length of extending rod is 50mm. | Straight angle testing | TS90 - Right Angle Rod, change the position of the sensor, mostly use for measure surface
of particular groove. | Standard pick-up TS100 | TS100 - Standard Sensor, to measure most of the plane, inclined plane, cone surface, inner
hole, groove and other surface roughness, in addition to the
standard sensor, other special sensors are needed to measure the
measuring platform. | Curved Surface Pick-up | TS110 - Curved Surface Sensor, to measure smooth cylindrical surface which radius is larger than
3mm, for the large radius smooth spherical surface and other
surface also can obtain good approximation, need to work with
platform TA520 or TA620. | Small hole Pick-up | TS120 - Small hole Sensor, to measure the inner surfaces of holes with radius more than 2mm,
better to work with platform TA520 or TA620. | Deep Groove Pick-up | TS131 - Deep Groove Sensor, measure groove with width wider than 3mm and depth deeper than
10mm, or the surface roughness of step with height less than 10mm,
also can used to measure the planar, cylindrical used with
platform,better to work with platform TA520 or TA620. | | TA520 -Metal Substrate Working platform, adjustable height 200mm. With flexible and stable operation and wider application range.
Roughness of complex shapes can also be measured. Measurement stand
enable the adjustment of the position of stylus to be more precise
and measurement to be more stable. If Ra value of measured surface
is relatively low, Using measurement platform is recommended. | | TA620 -Marble Substrate Working Platform, adjustable height 300mm. With flexible and stable operation and wider application range.
Roughness of complex shapes can also be measured. Measurement stand
enable the adjustment of the position of stylus to be more precise
and measurement to be more stable. If Ra value of measured surface
is relatively low, Using measurement platform is recommended. | | Standard Roughness Calibration Block Multi-engraved lines (Square
Wave) Made by optical glass, with high hardness, high accuracy standard
roughness value, anti-scratch, has longer life than metal roughness
block. Meet standard GB/T19067.1-2003 and ISO5436-1:2000 Approximation: Ra=0.1um, 0.2um, 0.4um, 0.8um, 1.6um, 3.2um, 6.4um Customized Value and Sine Wave available, welcome to inquire. | | Standard Roughness Calibration Block Single engraved lines Made by optical glass, with high hardness, high accuracy standard
roughness value, anti-scratch, has longer life than metal roughness
block. Meet standard GB/T19067.1-2003 and ISO5436-1:2000 Approximation: Ra=0.1um, 0.2um, 0.4um, 0.8um, 1.6um, 3.2um, 6.4um) Customized Value available, welcome to inquire. | | Roughness Comparator (30 pcs/set) This set contains standards of the six most important machining
methods in the prevalent "AA" values. These surface roughness is
used to compare and determine the degree of the surface finish by
comparision method and eye estimation or magnifying glass.The
surface rough contast blocks is made of 45 super carbor steel
except the GCr15 which is using to plat lapping the sample block.
All 30 speciments are calibrated in u''AA (Arithmetical Average)
and in the metric equivalents um Ra. | | Charge and Cable for Surface Roughness Tester Charger: US and EU standard optional Cable: USB interface | | Mini thermal printer External printer, connect by USB interface, suitable for HUATEC
models. | | Thermal printing paper Suitable for mini thermal printer and HUATEC’s tester with built-in
printer Packing: 10pcs/bag |
Key words:portable roughness tester, roughness ra, surface
roughness, surface finish, roughness tester mitutoyo, roughness
testing machine, surface finish tester, surface roughness tester
manufacture, roughness testing machine manufacture
|