Inductance Sensor Portable Surface Roughness Tester SRT 6210 with 10mm LCD
|
Highly Sophisticated Inductance Sensor Portable Surface Roughness
Tester SRT6210 with 10mm LCD Features: Surface roughness tester SRT6210 is compatible with four standards
of site to measure surface roughness of various machinery-processed
parts, calculate corresponding and clearly display all measurement
parameters. When measuring the roughness of a surface, the sensor
is placed on the surface and then uniformly slides along the
surface by driving the mechanism by the sharp built-in probe.
This roughness causes displacement of the probe which results in
change of inductive amount of induction coils so as to generate
analogue signal, which is in proportion to the surface roughness at
output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the
measurement results on LCD. * Multiple parameter measurement: Ra, Rz, Rq, Rt * Highly sophisticated inductance sensor * Four wave filtering methods : RC, PC-RC, GAUSS and D-P * Built-in lithium ion rechargeable battery and control circuit
with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and
analyzing by the optional cable and the software for RS232C
interface. * Manual or automatic shut down. The tester can be switched
off by pressing the Power key at any time. On the other
hand, the tester will power itself off about 5 minutes after the
last key operation. * The tester can memorize 7 groups of measurement results and
measuring conditions for later use or download to PC. * Metric /Imperial Conversion Specifications: Display: 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra,
Rq: 0.005-16.00um/0.020-629.9uinch Rz,
Rt: 0.020-160.0um/0.078-6299uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance
type Radius of Probe Pin: 5µm Material of Probe Pin:
Diamond Dynamo-measurement of
Probe: 4mN(0.4gf) Probe Angle: 90º Vertical Radius of Guiding
Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 1-5L Driving speed: sampling length = 0.25mm
Vt=0.135mm/s sampling length = 0.8mm
Vt=0.5mm/s sampling length = 2.5mm
Vt=1mm/s returning
Vt=1mm/s Profile digital filter Filtered
Profile:
RC Filtered
Profile:
PC-RC Filtered
Profile:
Gauss Non-Filtered
Profile: D-P Resolution :
Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50℃
Humidity <80% Size:
140x57x48 mm
(5.5x2.2x1.9 inch) Weight:
about 420 g
Key words:portable roughness tester, roughness ra, surface roughness, surface finish, roughness tester mitutoyo, roughness testing machine, surface finish tester, surface roughness tester manufacture, roughness testing machine manufacture |
Product Tags: digital surface roughness tester surface roughness meter |
![]() |
Eight Different Probes Oled Portable Roughness Tester For Narrow And Deep Holes |
![]() |
CE Handheld SRT5200 Digital Surface Profile Gauge |
![]() |
DSP Chip 14 Parameters surface roughness gauge Electromechanical Integration Design |
![]() |
Inductance Sensor Ra Rz Surface Roughness Tester With Separate Probe |
![]() |
JIS 160μM 3.5" Portable Surface Roughness Tester |
![]() |
ASTMD 4417B 6500um Portable Surface Roughness Tester |