Surface Finish Comparator Portable Surface Roughness Testers Digital Surface Roughness Tester
|
Surface Finish Comparator Portable Surface Roughness Testers
Digital Surface Roughness Tester 10mm LCD with blue backlight 10um Ra / Rz Portable Surface
Roughness Tester SRT6200 Features: This instrument is compatible with four standards of ISO, DIN, ANSI
and JIS and is widely used in production site to measure
surface roughness of various machinery-processed parts, calculate
corresponding parameters according to selected measuring
conditions and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on
the surface and then uniformly slides along the surface by driving
the mechanism inside the tester. The sensor gets the surface
roughness by the sharp built-in probe. This roughness causes
displacement of the probe which results in change of inductive
amount of induction coils so as to generate analogue signal, which
is in proportion to the surface roughness at output end of
phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the
measurement results on LCD. * Very easy to operate * Multiple parameter measurement: Ra, Rz * Highly sophisticated inductance sensor * Built-in lithium ion rechargeable battery and control circuit
with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and
analysing by the optional cable and the software for RS232C
interface. * Manual or automatic shut down. The tester can be switched
off by pressing the Power key at any time. On the other
hand, the tester will power itself off about 5 minutes after the
last key operation. Specifications: Display: 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz Display Range Ra:
0.05-10.00um/1.000-400.0uinch Rz:
0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle:
Inductance type Radius of Probe Pin: 10um Material of Probe Pin:
Diamond Measurement Force of
Probe: 16mN(1.6gf) Probe Angle: 90° Vertical Radius of
Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 1~5 cut off optional Driving speed: sampling length =
0.25mm Vt=0.135mm/s sampling length =
0.8mm Vt=0.5mm/s sampling length =
2.5mm Vt=1mm/s
returning
Vt=1mm/s Resolution : 0.001μm if reading <10μm
0.01μm
if 10μm≤reading<100μm 0.1μm
if reading
≥100μm Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50℃ Humidity
<80% Size:140x57x48 mm (5.5x2.2x1.9 inch) Special pick-up for grooves, bores and holes Key words:portable roughness tester, roughness ra, surface roughness, surface finish, roughness tester mitutoyo, roughness testing machine, surface finish tester, surface roughness tester manufacture, roughness testing machine manufacture |
Product Tags: digital surface roughness tester surface profile gauge |
![]() |
Eight Different Probes Oled Portable Roughness Tester For Narrow And Deep Holes |
![]() |
CE Handheld SRT5200 Digital Surface Profile Gauge |
![]() |
DSP Chip 14 Parameters surface roughness gauge Electromechanical Integration Design |
![]() |
Inductance Sensor Ra Rz Surface Roughness Tester With Separate Probe |
![]() |
JIS 160μM 3.5" Portable Surface Roughness Tester |
![]() |
ASTMD 4417B 6500um Portable Surface Roughness Tester |