NiAl20 Thermal Spray Wire For Arc Spray Bonding Layer
|
|
NiAl20 wire thermal Spray Wire for Arc spray boning layer
PRODUCT OVERVIEW Nickel based alloy wireThermal spraying techniques are coating processes in which melted (or heated) materials are sprayed onto a surface.The "feedstock" (coating precursor) is heated by electrical (plasma or arc) or chemical means (combustion flame).Thermal spraying can provide thick coatings (approx. thickness range is 20 micrometers to several mm, depending on the process and feedstock), over a large area at high deposition rate as compared to other coating processes such aselectroplating, physical and chemical vapor deposition. Coating materials available for thermal spraying include metals,alloys, ceramics, plastics and composites. They are fed in powder or wire form, heated to a molten or semimolten state and accelerated towards substrates in the form of micrometer-size particles. Combustion or electrical arc discharge is usually used as the source of energy for thermal spraying. Resulting coatings are made by the accumulation of numerous sprayed particles. The surface may not heat up significantly, allowing the coating of flammable substances. Coating quality is usually assessed by measuring its porosity, oxide content, macro and micro-hardness, bond strength andsurface roughness. Generally, the coating quality increases with increasing particle velocities.
Several variations of thermal spraying are distinguished: Plasma spraying Detonation spraying Wire arc spraying Flame spraying High velocity oxy-fuel coating spraying (HVOF) Warm spraying Cold spraying
Our company use Vaccum furnace and casting control to mak the NiAl alloy solid wire, it is specially used for arc spray boning layer. This wire has stable chemical composition, low oxgen and high bonding strength.
Applying technique: Arc spray Specification of wire: 1.6mm, 2.0mm, 15kg/spool NiAl20 is a cored wire specifically designed for either arc spraying or flame spraying. It is self-bonding to most materials and requires minimal surface spreparation. Bond strengths in excess of 9000 psi
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: NiAl20 Thermal Spray Wire 2.0mm Arc Spray Wire Arc Bonding Layer Thermal Spray Wire | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Nickel Alloy Inconel 625 ERNiCrMo-3 MIG / TIG Welding Wire 1.0mm |
|
Thermal Spray Wire Arc Spray Wire Inconel 625 |
|
Nickel Based Alloy Thermal Spray Wire UNS N10276 Hastelloy C-276 In Size 1.6mm |
|
Corrosion Resistance Coating Thermal Spray Wire Inconel625 1.6mm 2.0mm |
|
Nickel Alloy Inconel Thermal Spray Wire 625 ERNiCrMo-3 Welding Electrode Aws A5.14 |
|
1.6mm Arc Thermal Spray Wire Alloy Hastelloy C276 |