LPT slip rings are through-hole slip rings (the center hole can
pass through the drive shaft, gas-liquid passage; it can also
integrate high frequency, fiber, encoder, waveguide, gas and liquid
and other joints). Using advanced fiber brush, reliable contact is
guaranteed with very low friction. The center hole can be selected
from 0 to 1000mm, the current can be selected from mA to 5000 amps,
and the voltage can be up to 10000 volts, which can fully meet your
different transmission schemes.
Specification |
Circuits | 24 circuits |
Operating Speed | 0-300rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | 60%RH or higher |
Voltage Rating | 240VAC/DC |
Current Rating | 15A per circuit |
Dielectric Strength | ≥1000V@50Hz between each circuit |
Insulation Resistance | 500MΩ@ 500VDC |
Electrical Noise | 1mΩ Min |
Contact Material | Precious metal |
Protection | IP54 or higher |
Via diameter | 25.4mm |
Product outline drawing
Product Image