We are professional Monel K-500 K500 Forged Forging Flanges(UNS
N05500,2.4375,Alloy K-500) factory from china
Monel K-500 Chemical composition:
Alloy | % | Ni | Cu | | | Fe | Mn | S | C | |
Monle K500 | Min. | 63 | 27.0 | 2.30 | 0.35 | | | | | |
Max. | | 33.0 | 3.15 | 0.85 | 2.0 | 1.5 | 0.01 | 0.25 | |
Monel K-500 Physical properties :
Density | 8.44 g/cm3 |
Melting point | 1315-1350℃ |
Monel K-500 minimum mechanical properties in the room temperature:
Status | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % |
Monel K500 | 1100 | 790 | 20 |
Alloy K-500 has approximately twice the tensile strength and triple
the yield strength of Alloy 400. The strength of Alloy K-500 is
maintained to 1200 degrees Fahrenheit, but stays ductile and tough
down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also
stays non-magnetic to -200 degrees Fahrenheit.
Additional characteristics of Alloy K-500 include outstanding
corrosion resistance in a wide range of chemical and marine
surroundings, from salts and alkalis, non-oxidizing acids to pure
water. Alloy K-500 is non-magnetic and spark resistant. It is also
recommended that Alloy K-500 be annealed when it is welded and that
any weldments be stress relieved prior to aging.
Industries Served:
gas & oil extraction
chemical processing
marine engineering
As per surface treatment of EN Monel K-500 flange, we could do
Anti-rust Oil;Black /Yellow Paint;Hot-dipped Galvanization as per
the requirement of the clients
The material grade of EN Monel K-500 flanges is by forging as per
the standard of ASTM B462.
We will do following testing to control the quality of Monel K-500
Flanges:Chemical Analysis,Corrosion Test,Tensile, Hardness,
Flattening, Flare, Flange and Reverse-bend tests,Eddy Current
Testing,Hydrostatic Testing,Air under Press Test,IGC Test (Inter
Granular Corrosion Test),Micro-Structure Analysis,Radiography
Test,Ultrasonic Test,Liquid Penetrate Test
- Forging & Heat Treatment Equipment List
Name & Description | Forging Handling Capacities | Quantity |
3150 Tons Free Forging Hydraulic Press | Max. Single Forging in 28 Tons | 1 |
5000mm Diameter Rolling Forging Machine | Max. Single Forging in 16 Tons | 1 |
8 Tons Free Forging Hummer | Max. Single Forging in 7.5 Tons | 1 |
6 Tons Free Forging Hummer | Max. Single Forging in 5.5 Tons | 1 |
5 Tons Free Forging Hummer | Max. Single Forging in 4.5 Tons | 1 |
60 Tons Forging Handling Operator | Max. Single Forging in 45 Tons | 1 |
10 Tons Forging Handling Operator | Max. Single Forging in 7.5 Tons | 1 |
80 Tons Crane | Max. Single Ingot in 80 Tons | 1 |
60/30 Tons Crane | Max. Single Ingot in 60 Tons | 1 |
30/10 Tons Crane | 30/10 Tons | 4 |
Trolley Heat Furnace | 5000*1500*1200 mm | 3 |
Trolley Heat Furnace | 8000*2000*1600 mm | 3 |
Trolley Heat Furnace | 6500*1500*1200 mm | 3 |
Vertical Heat Furnace | Ø2500*10000 mm | 2 |
Total Forging Equipment Quantity | 24 |
