Non-ionic polyacrylamide (NPAM) is a water-soluble polymer
formed from acrylamide (a compound with the molecular formula
C3H5NO) subunits special for producing Potassium Chloride with high
performance.
Description: - Soluble in water, safe, non-toxic, hydrolytic stable, is not
sensitive to the change of pH value, anti-chlorine. Harmless,
non-flammable, and non-explosive, it can be stored at room
temperature, and it cannot be placed in the sun. It is slightly
acidic, when skin contact, wash immediately with plenty of water.
Due to the polar groups on the molecular chain containing a certain
amount, it can through the adsorption of solid particles suspended
in water, bridging between particles or through the charge and make
the particle formation of large flocs condensation. So, it can
accelerate the settlement of particles in suspension, and have
obvious to speed up the solution to clarify, promote filtering, and
other effects.
|
Specifications: Appearance: | Off-White Granular Powder | Ionic Charge: | Non-ionic | Particle Size: | 20-100 mesh | Molecular Weight: | High | Hydrolysis Degree: | Low | Solid Content: | 89% Min | Approximate Brookfield viscosity at 25° C: | @ 1.0% | >1500 | @ 0.50% | >600 | @ 0.25% | >300 | Bulk Density: | About 0.6-0.8 | Specific Gravity at 25°C: | 1.01-1.1 | Recommended
Working Concentration: | 0.1-0.5% | PH (1% aqua solution): | 6-9 | Storage Temperature (°C): | 0 - 35 | Shelf Life: | 2 years |
Competitive Advantage: 1 | European Standard, SGS, BV, and ISO certification | 2 | Easily soluble in water; dissolves rapidly. | 3 | Noncorrosive of suggested dosage, economical,
and effective at low levels. | 4 | Faster sedimentation, better flocculation. | 5 | Non-pollution (no aluminum, chlorine, heavy metal ions,
etc.). | 6 | 10 years of
manufacturing experience, with more than 20 technical engineers |
Application Methods: Dissolving
concentration: | Polyacrylamide (polyelectrolyte/flocculant) should be standardly
dissolved to 0.1-0.5% concentration. | Dissolving
time: | The time required to dissolve the flocculant varies according to
the type of flocculant, water quality, temperature, and agitation.
However, most flocculants generally require around 1 hour of
agitation to completely dissolve the powder. An incomplete mixture
of flocculant or lumping may inhibit the performance of the
flocculant. | Agitation
speed: | The ideal revolution of the agitator is between 200-400rpm. A
high-speed agitator operating without reducing the revolution of a
motor is not advised, since it may cut the molecules of the
flocculant. An ideal agitator motor should be of 1HP for a 1-2m3
mixing tank. | Application
and Dosage: | The dosage range of varies from 1 - 3.0 ppm depending upon the type
of effluent and application. Advised to do jar tests for evaluating
the functioning and approximate dosage. | Jar Test: | Put sample of effluent in a beaker and add it as designated,
agitate for 1 minute at 100-120 rpm, and then slowly agitate at
60rpm. Determine the flocs properly at this time and note the
sedimentation and clarity of the top solution. |
Package and Storage: - Packed in Kraft or PE bags with inner plastic bags, with each bag
containing 25kgs, or 750kgs net big bag.
- Stored in the original packaging in a cool and dry place, away from
sources of heat, flame, and direct sunlight.
|
Bluwat Main Products: - BWD-01 Water Decoloring Agent, for color removal for textile dyeing
wastewater treatment and for other wastewater.
- Poly Aluminium Chloride(PAC), for drinking water treatment for
wastewater treatment.
- Polyacrylamide (PAM)/Polyelectrolyte, for water treatment, for
sludge treatment.
- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling, for
drilling mud additive in the oilfield.
- Ferric Sulphate, for drinking water and wastewater treatment.
- PolyDADMAC, for water treatment and for paper mills, and for
cosmetics.
- Polyamine, for drinking and wastewater treatment, sludge
dewatering, paper making, and oilfield.
- Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water
treatment and other fields.
|
|
