PLC Controlled Precision Cold Roll Forming Machine For Roofing Tile Making
|
|
PLC frequency conversion controlled cold roll forming machine for making roof tile
Cold Rolling Mills
Feeding section with guide; Gear/Sprocket driving;20-step to form Rollers manufactured from 40Cr, CNC lathes, hard Chrome Coated Shafts Diameter=75mm, Precision Machined Main motor =7.5 KW, Frequency speed control Forming speed:Approx. 15m/min; Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside Hydraulic Cutting Device Stop to cut, Post cut, No Blanking cut Pump motor =4.0KW Cutting tool material : Cr12, Heat treatment;
Explanatory Note Description
Manual Un-coiler[1] : One set. The price of manual un-coiler is included in the FOB Price.
Diameter of Main Shaft: 95 mm; Rollers Station: 14 Rows [2] : The diameter of main shafts are bigger than older type, and they will be more practical, more efficient and more durable! The 14 rows of rollers station is more reasonable than older type, and make the machine has a longer service life and make the products have a more stable performance.
Machine Body: Electrostatic Spraying Treatment[3] : Their surfaces are not coated with paint. First, they will be treated by Sand Treatment Equipemnt, and then be sent to Electrostatic Spraying Treatment Room, under the high temperature (over 260℃) to finish the final spraying treatment. So, They will have a good waterproof and rust protection performance, and look more beautiful.
Hydraulic Station Structure: 300mm steel welded; Four Pole Structure[4] : The four pole structure will make the cutter has a more stable performance when cutting the panel, controlled by Hyd System, and with better accuracy. This is own special devising.
Electrical System: PLC and HMI touch Screen (Taiwan Delta)[5] : It can be modified as per customers requirements, such as Siemens, and the operation system language can be specified, such as English, French, Russian and so on.
Quick Details
1. CE, BV, SGS certificates
Technical Parameters
Machine composition:
5Ton*1250mm Hydraulic un-coiler Hydraulic system expand coil inner hole, Pump motor: 4KW Frequency Inverter to regulate turning speed, Motor: 2.2KW Link-connect expanding system Automatic stopping device, Load capacity = Max.5Tons Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm Dance arm assistance for coil-turning speed control
Manual Pre-shearing device (Un-powered)
Smart cut control, to cut off the end of the final piece of sheet only
Machine Show |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: cold rolling equipment cold rolling machine | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
2-WAVE Galvanized Steel Highway Guardrail Roll Forming Machine |
|
Standard Size Highway Roadside W Beam Guardrail Roll Forming Machine |
|
Steel Silo Making Machine , 4.5 Mm THK Grain Bin Silo Cold Roll Former |
|
Customized 5.5kw Metal Rotary Punching Machine 0-10m / Min High Speed |
|
Customizable Hydraulic Cutting Highway Guardrail Roll Forming Machine |
|
Light Steel Roll Forming Machine for Modular Prefabricated Steel Frame House |