Cement And MgO Board Production Line Partition Fireproof Wall Panel Making

Magnesium oxide board production line

1. Brief introduction

Magnesium oxide board production line with fashionable design, reasonable structure, stable running manufactured board of even thickness in large production once through double- roller-extruding technology. This production line is equipped with shaking device which removes inside and outside air bubble, so our board is more smooth. In addition, we use the no-woven cloth as the separating film to increase the toughness and strength of the board. The machine can be adjusted arbitrarily, and then produce the board with the thickness of 2-60mm, the biggest width of 1, 300 mm and unlimited length. So you can adjust the thickness of board as you like.

2. Finished board size and features

2-60mm thickness
Biggest width:1300mm
Unlimited length

3. Finished board features

1. Oxygenic index%: 90

2. Level combustion: SO

3. Vertical combustion: SO

4. Water content rate: 10.9%

5. Capacity: 1.15g/cm3

6. Static bending intensity: 169.46Mpa

7. Density: T/ m3 1.13

8. Water resistance: Without chalking for 24 hours and there is no change on surface

9. No Three-wastes (waste water, waste gas and waste residue), no pollution and environmental protection

A. Project Feature:

1. The source of the production raw materials is widely with no regional restriction. The product is made of magnesia, mgcl2,fiber glass mesh, on-woven fabrics and other fillers. The board is formed one-time by the machine.

It is easy operation, low production cost, small investment and fast effectiveness.

2. The automatic mgo board production line in China has high automatic degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.

3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.

4. It can produce according to different customers' request like size (length* width*thickness) , material .This automatic mgo board production line in China can produce boards Max length 3660mm and width is 1250mm.Thickness from 3-25mm.

B. Equipment Feature:

This automatic mgo board production line in China adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing.

fireproof mgo board production line. It runs stably with high automatic degree, the specification of its product can be adjusted arbitrarily.

The equipment actually realizes the industrial production-line of new model building wall board, and the product have even and glazed surface with high compactness.

The equipment largely reduces the labor intensity of worker and thoroughly changes many shortages of the former casting forming with upright mould or flat mould, such as large mould usage, low recycling rate, required electrical heating or steam heating, single kind of product as well as the sound insulation and heat-preserving which don’t meet the market requirements.