EPS Wall Sandwich Panel Machine with High Precise Guiding Pressure Reducing Valve Controls

EPS Wall Sandwich Panel Machine with High Precise Guiding Pressure Reducing Valve Controls

EPS Wall board machine, EPS sandwich wall board making machine, wall panel machine

1. Main feasture:

1).The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature

control, material level control to realize automatic production. 

2). With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.

3).The closed constant pressure foamng barrel features of high heating efficiency and saves stem.

4).High precise guiding pressure reducing valve controls the temperature and steam pressure of the

closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled

within ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the

bad temperature control.

5).With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.

6).The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and

material conveying to silos.

7).Most components are of world-famous brands, with reliable performance, stable quality, long service

 life and low maintenance cost.

8).The machine can realize the primary and second expansion

Straw color wave roof tile forming machine can produce pantile with all kinds of

waves and heat-preserving layer, which will be used at the roof as the substitute 

of traditional asbestos tile, color steel tile and cement tile. There is asbestos in the 

asbestos tile which include carcinogen. 

Product features

The product manufactured by this equipment has following features: fireproof, 

waterproof, environmental protection and no toxicity, at the same time it is

 resistant against acid, alkali and aging. This product can be nailed, planed, sawed

 and sticked. In view of that its fireproofing grade is A, so our product will not be 

combustible when the fire is 800-1000°C.At the same time, when our product is 

fell into the water for a week, there are not the following phenomenon such as 

chalking, deformation and warp. In light of there is not glue in the raw materials,

 so there is not formaldehyde and benzene for our boards.Rich color and never

 fading

Technology features

This machine adopts reverse in-phase running technology.

There is not any requirement about high temperature and high pressure during 

production processing. The board will be

 formed at one time after rollerextruding under the conditions of normal temperature

 and normal pressure. This is a green environmentalprotection project, because

that there is no waste water, waste materials and waste gas during its production

 processing. The finished board don’t need high temperature drying, airdrying and

 watering, and under the normal temperature, they will dry well indoor.  

Equipment Model and Product Specification

According to different production, our equipment has 6 models for large-scale, middle-scale and 

smallscale. Our all equipment can produce board with same quality and specification

 but different production.Customers can adjust the specification of the pantile 

according to different requirements, the standard specification is 1.8mX0.72m, 

the biggest length is 6 m, the thickness is 3mm~6mm generally. In addition, this

 equipment can produce the pantile with 

heat-preserving layer.