Mgo Board Production Line , Large Format Lightweight Wall Panel
Machine
MGO Board Machine,Full Auto-Matic MGO Board Producing Machine,mgo
board machine
. Usage of Product
The Magnesium Oxide Board (Glass Magnesium Board or MGO Board)is
made of filling materials, such as sawdust and all kinds of crushed
plant straw (you can select any one kind ) and several chemical raw
materials which are token as modified material after special
technology. The board has such features: Quickly hard, high
strength, large format, fireproofing, dampproof and good waterproof
performance. It can be nailed, planed and sticked, so it can be
used widely at indoor decoration, such as wall skirting and ceiling
of market, hotel, club, station, office building and living room.
And it can get large usage at topgrade furniture, door and
partition. This product is made of waste materials, and it is ideal
product which can replace all kinds of wood broad with reasonable
price and good quality.
3. Technical Index of Product
Technical Index for finished board
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m31.13
8. Water resistance: Without chalking for 24 hours and there is no
change on surface
9. No Three-wastes (waste water, waste gas and waste residue), no
pollution and environmental protection.
4. Machine Advantage
Project Feature
1. The source of the production raw materials is widely with no
regional restriction. The product is made of sawdust, straw (rice
hulls), many kinds of crop straw and inorganic material (such as
talcum powder, infusorial earth and powder coal ash) after special
technology. So this project have low production cost, small
investment and fast effectiveness.
2. The equipment has high automatization degree, simple production
technology, low labor intensity and production line, and there is
no noise and three-wastes (waste water, waste gas and waste
residue) during production.
3. Low production energy consumption. With the influence of
chemical reaction, it can meet the requirements about production
technology without high temperature and high pressure.
III. Product Feature and Performance
(I)Performance
1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
| 2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
| 3 | Anti-breaking load | ≥1400N | 5640N |
| 4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
| 5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
| 6 | Thermal bridges area ratio | ≤8% | 2.22% |
| 7 | Sound reduction Index | | 36dB |
| 8 | Radioactivity | | None
|
