Glass Fused To Steel Water Tanks , Liquid Fertilizer Storage Tanks

Glass Fused To Steel Liquid Storage Tank Comply With Nsf61 Certification

Brife introduction of glass fused to steel tank

Glass fused to steel tank is a kind of factory fabrication tank , which made of glass coated on Ti-rich special steel plates . The steel plates are coated with enamel powder ( mixing with 10-20 different materials ) and burned in oven ( Temperature from 800 celsius to 950 celsius ) , which makes the steel sheet and glass coated greatly blend together . High recommended , all of the holes on the tank wall will be precutted on the workshop , instead of on job site . Accoding to the size of hole , there will be some flanges nozzles along with .

About the installation of glass fused to steel tank , there is no need big equipment to do it . Jacks are required during the installation , we will install the tank from the top ring , one by one until all of them are installed . Glass fused to steel tank is widely used in wastewater treatment , sludge treatmentanaerobic digester , because of its’s excellent corrosion resisitance .

Our technology advantages

GFS tank specifications

1. Type : Glass fusedto steel liquid tank

2. Color : Cobalt blue,green , sky blue,or custom color

3. Roof : Glass fused to steel roof , aluminum dome roof , aluminum deck roof , fiberglass roof .

4. Size : Tank size up to 18000m3 , will be larger in the near future .

5. Service Life : More than 30 years , better than traditional tank like concrete tank

6. PH range : Standard sheet PH:3-11 , Special sheet PH : 1-14

7. Holiday test : More than 1500V

8. Corrosion resistance : Excellent ,suitable for wastewater , salt water , sea water , high sulfur crude oil , salt fog , organic and inorganic compounds

9. Hardness : 6.0 mohs

10. Elastic : Same as steel sheet , around 500 KN/mm

11. Adhesion : 3,450 N/cm