-65℃ - +150℃ Temperature Shock Testing Chamber 810l Volume For Pcb Board

-65℃ ~+150℃ Thermal Temperature Shock Testing Chamber for PCB Board

Application:

High Low Temperature Shock Testing Chamber, TS-80(A~C) Thermal Shock Chambers is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.

Thermal Temperature Shock Testing Chamber Features:

1.It is divided into three zones: high temperature zone, low temperature zone, and testing zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.

TS-80(A~C) Thermal Temperature Shock Chambers Technical parameters:

Saftey device:

1. With no-fuse protection switch
2. Control system with phase sequence protection and low voltage electrical protection.
3. With over-heat protection switch.
4. Over load protection device for refrigeration compressor.
5. Refrigeration compressor high and low voltage protection switch.
6. Refrigeration compressor over oil pressure protection.
7. Lack of Anti-phase protection system.
8. Overload protection for circulation fan motor.

Warranty: one year free warranty for whole set machine,lifelong time maintainance.

After-sale service: feedback within 8 hours after get the call or email.

Service:OEM service,Design service,Buyer lable service.

Certificate of these the machine:

China official 3rd party calibration report
CE certiification

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. High Low Temperature Shock Testing Chamber, TS-80(A~C) Thermal Shock Chambers is our star products , and we had obtained the CE certification for this machine .

For the package:

1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK

ASLi main test equipments:

If you have any question with our ASLI Thermal shock test chamber , pls kindly feel free to contact with us , thank you.