Electric Brass Hot Runner Spring Coil Heater Heating Element
|
Electric Brass Hot Runner Spring Coil Heater Heating Element |
||||||||||||||||||||||||||||||
Minimum diameter Φ | 10mm |
Voltage | 12V- 400V |
Wattage tolerance | ±10% |
Material | SS304/SS321/SS310/SS316 (Customized) |
Sleeve material | Brass |
Resistance | ±10% |
Dielectric strength | 600V 800V 1000V |
Insulation(cold 1000V) | >10 MΩ |
Leakage current(cold) | <0.5mA |
Max power density | 10W/cm² |
Heating length tolerance | ±0.05mm |
Maximum working temperature allowed on sheath | Max.750℃ / 1380°F |
Build-in Thermocouple | Type K/ J/ E |
Standard supply 1000mm PTEE insulated nickel lead wire | |
Material of lead wire:Fiberglass, Kevlar, Telfon, Silicone Rubber, Metal braided, SUS armoured. | |
Application:
1.Injection molding machine nozzle
2. Hot Runner Nozzles & Bushings
3. Packaging machinery
4. Hot runner Injection Molds
5. Injection & Blow Moulding Machine Nozzles
6. PET preform & Thin wall container Moulds
7. Hot runner Manifolds
|
Coil Heaters With Stainless Steel & Brass Casted Covers For Hot Runner System |
|
Electrical Hot Runner Press in Brass Coil Heater for hot runner system |
|
Plastic Injection Molding Nozzles Coil Brass Heater |
|
Stainless Steel Cartridge Resistance Brass Band Heater For Injection Molding Machine |
|
Nozzle Injection Molding Machine Spring Heating Hot Runner Heating For Hot Runner System |
|
Hot Runner Brass Coil Heater For Hot Runner System And Plastic Injection Molds |