Hot Runner Brass Pipe Heater Nozzle Heater Pressed With Coil Heater
and thermocouple
Description:
1) Hot runner coil heaters are made of nickel chrome resistance
wire placed inside chrome nickel steel tube filled with MgO powder
and compacted for faster and efficient heat transfer. The heaters
are annealed to acquire malleability for bending into any shape.
2) Hot runner heaters with built in thermocouple are also
available. Hot runner bushes are produced with hot runner heaters
of different cross section with inner brass and outer stainless
steel cover.
The flat coil heater: 110/120V,100W/150W/200W ,8/9/10mm ID and 25/26mm OD
,with k type thermocouple and ground wire. with 5 feet black kevlar
sheath and fully black XLR male plug
12VDC, 70W ,8/9/10mm ID and 25/26mm OD ,with k type thermocouple and ground
wire. with 5 feet black kevlar sheath and fully black XLR male plug
Specification:
1. Flexible cold section
2. Higher watt density than a cable heater
3. Resistance wire centered for more repeatable heat profile
4. Sealed transition head for moisture resistant applications
available
Sheath material | 304SS or 316L |
Range of working voltage | 12V to 440V |
Built-in thermocouple | with or without J /K TC(Available) |
Wattage | 200-3000w( 6.5W/CM2 ) + 5% tolerance |
Inner heating element | NiCr8020 |
Insulation | High pure Mgo |
Tube color | sliver or annealed black |
Coil style Length | 40-200mm (+ 0.5mm) |
TC optional | type J, K, E and T |
TC Tolerance | ±10℃ |
Surface treatment | Original metal bright |
Lead and sleeve | PTFE ,Fiberglass,Kevlar etc |
Heater cross section optional | 4.2x2.2mm, 3x3mm |
Application:
1.Injection molding machine nozzle
2. Hot Runner Nozzles & Bushings
3. Packaging machinery
4. Hot runner Injection Molds
5. Injection & Blow Moulding Machine Nozzles
6. PET preform & Thin wall container Moulds
7. Hot runner Manifolds
