Mineral insulated Thermocouple RTD in PT100 / PT1000 , high tempertaure sensor

Mineral insulated thermocouple or RTDS in PT100/PT1000 with high tempertaure sensor
 
Description:

1) GME's Thermocouples are used in industry for measuring the temperature of gases, liquids or solid surfaces etc., Its usually assembled with indicators, recorders or computers.

2) A thermocouple consists of two dissimilar metals joined together at one end. When the junction of the two metals be cooled or heated and a voltage is produced that can be correlated back to the emperature. The calibrations are K, N, E.J, T, S, R, B. Each calibration has a different temperature range

 
3)Thermocouple is composed of temperature sensor and signal converter, signal converter is installed in the junction box of temperature sensor, temperature sensor produce resistance or potential effects made by the temperature affect, via transformation to create a differential voltage signal. The signal via the amplifier amplification, then through voltage and current transformation, output 4-20 mA current signal corresponding to the range.
 

Specification:

Technical Specs:

Pt100 sensor

Extension cable - 3 wires/2 wires

Standard cable length:2.5 mt

Pick-up range: from - 50 °C to 220 °C

Protection: IP 68

Flexible tinned copper wires 3x22 AWG

Primary insulation: silicon rubber

Shield: All. foil shield 100%

Secondary insulation: blue silicone rubber

Colour: No. 2 red conductors

No. 1 white conductor

Advantages: