Hot Blast Galvanized Hydraulic Dock Leveler With 15 Ton Capacity

Browse Categories

Dongguan Haide Machinery Co., Ltd

City: dongguan

Province/State:guangdong

Country/Region:china

Tel:86-769-88708111

Contact Person:
Ms.Irene Guo View Contact Details

Hot Blast Galvanized Hydraulic Dock Leveler With 15 Ton Capacity

Brand Name	Haide
Model Number	HD-HGT10-GZ
Certifiion	CE/ISO
Place of Origin	China
Minimum Order Quantity	1 Set
Price	Negotiation(EXW,FOB or CIF price)
Supply Ability	60 sets per month
Delivery Time	25 days
Packaging Details	film,and put it directly to container.
Platform Width	1830mm
Platform Length	2280mm
Height	490mm
Dynamic Capacity	15 Ton
Adjust Range	+300mm/-300mm
Main Deck Thickness	8mm
Lip Board Thickness	16mm
Size Standard	6ft*8ft standard

Detailed Product Description

Hot Blast Galvanized Hydraulic Dock Leveler With 15 Ton Capacity

Description:

- Galvanized dockleveler is usually used in food wearhouse,meat&vegetables wearhouse,

- shambles,etc

- In above work condition,have higher environmental requirements,zero-tolerance for rust.

- Galvanized dockleveler have more than 10 years anti-rust capacity.It's a good choice for some special-requirements wearhouse and yard.

We can customize all kinds of Galvanized hydraulic dockleveler for customers.

1. We can manufacture the Hydraulic dock leveler with capacity 10ton up to 25ton.

2. We can manufacture it as per your any requirements.

3. Two laminated rubber bumper with woven fiber inside can withstand any shock between the truck and dock.

4. We will also prepare control panel for docklevelers

Difference of Hot dip galvanized and Hot blast galvanized.

Compare list	hot blast galvanized	hot dip galvanized
procedure	high voltage electric-arc equipment,will melt the Zinc-wire to liquid-zinc,high pressue blast the liquid-zinc to zinc-fog to the surface of the steel-product.(the steel-product have been sand-blasted at first,so the zinc have a good combination with the steel)	A big pool,pool be heated to 550~600℃,zinc is melted in the pool.Put steel-product in the pool.(the steel should be acid-washing at first)
thickness of Zinc-layer	Zinc layer thickness can be controled as requirement,thickness is 50-250μm available,and thickness of the zinc-layer is uniform	thickness of the layer is 50-80μm,and if the surface of the steel-product is not smooth,the zinc-layer would not uniform
requirement about the size of the steel-product	big size and small size are also ok,even very big size steel-product,it's also OK.	depend on the size of the zinc-pool,if zinc-pool is small,big size steel-product is can't be operated
melted-zinc's high temprature lead to thermal-stress	the heat loss quickly,and the surface of the steel-product won't over 250 ℃,won't lead to stress deformation.	The total steel-product will in the zinc pool all the way,and the 550~600℃ temparature will lead to big stress deformation
pre-treatment method	sand blasting treatment. After sand blasting,the surface of the steel product is rough,and can have a good combination with the zinc layer	Acid washing treament
the combination-strength between the zinc-layer and the surface of the steel-product	over 20MPa.	lower than 10MPa.and if the thickness of the zinc-layer is over 70 μm,easy to separate the zinc-layer out of the steel-surface.
repairing about the zinc-layer	if zinc-layer is damaged in transporting,welding,etc.easy to blast and repairing it again	if zinc-layer is damaged in transporting,welding,etc.can't use hot-dip to repair it,only can use hot-blast-zinc to repair it.
operating place	can be operated in any time,any place.	only can be operated in zinc pool
environmental protection	New tecnology,use equipment to operate,won't polute the environment,material is Zinc-wire,can begain and stop any time. Sand blasting is also very low polution for air.	Very old method for anti-rust,the zinc-pool need to keep heating all the way,and waste lot of zinc-material. Acid washing is high polution for the water.
disadvatage	the blast gun can not go in to small hole of the steel-product

Specifiions:

Specifiion of this dock leveler:

Equipment Specifiion(W*L*H): 1830mm*2440mm*490mm
Pit Dimension(W*L*H): 1870mm*2280mm*500mm
Dynamic Capacity: 10 ton
Adjust range: +300mm/-300mm
Main deck thickness: 8mm
Lip board thickness: 16mm
Power pack: : Italy "Hydr-APP" 0.75 KW 340~415V 3P 50Hz
Warranty: 365 days after installation for all, 5 years warranty for the steel structure.

All our standard dock leveler dimensions:

Model	Specifiion(WLH)mm	Pit Dimension(WLH)mm	Adjust range	Lip board(WLT)
6*6	18301830490	18701680500	+250mm/-200mm	183040015
6.5*6	19801830490	20201680500		198040015
7*6	21301830490	21701680500		213040015
6*8	18302440490(590)	18702280500(600)	+300mm/-300mm	183040015
6.5*8	19802440490(590)	20202280500(600)		198040015
7*8	21302440490(590)	21702280500(600)		213040015
6*10	18303050490(590)	18702880500(600)	+400mm/-300mm If the height is 590mm: +450mm/-350mm	183040015
6.5*10	19803050490(590)	20202880500(600)		198040015
7*10	21303050490(590)	21702880500(600)		213040015

Product Tags: hydraulic dock leveller mechanical dock leveler

Related Products

Hot Dip Galvanized Hydraulic Electric Dock Leveler With Bumpers for sale


From:	Enter your Email please. Your email is incorrect!
To:	Dongguan Haide Machinery Co., Ltd
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

Hot Blast Galvanized Hydraulic Dock Leveler With 15 Ton Capacity

Hot Blast Galvanized Hydraulic Dock Leveler With 15 Ton Capacity

Hot Dip Galvanized Hydraulic Electric Dock Leveler With Bumpers

10T CE ISO Boxed Up Hydraulic Dock Leveler Adjustable Yard Ramp

Big Size two main cylinder Hydraulic dock leveler

Hot Dip galvanized Hydraulic dock leveler with 10 ton capacity

Custom Riffled Plate Hydraulic Dock Leveler Manufacturing Save Time

Truck Hydraulic Manual Dock Leveler With 6 Ton Capacity CE Approved