Electronic Components Identification Nljd Detector Security Checking Equipment
|
|
Continuous wave mode 1.3 hours Non-Linear Junction Detector
Introduction The non-linear Junction Detector HW-24 is used to search and locate electronic devices in on or off state. When a radio frequency signal is detected, the non-linear junction detector generates second and third harmonics.Semiconductor components will display higher grades on the 2nd harmonic.Corrosive semiconductor components will display higher grades on the 3rd harmonic.The non linear junction detector analyzes the 2nd and 3rd harmonics reflected from the target to ensure the rapid and reliable identification of electronic components and corrosive semiconductors.
Features 1. The detector is easy to operate, it is an ideal security tool. Modulation mode: pulse wave, continuous wave, to ensure a wide range of detection and reliable analysis of electronic devices. Automatic control of output power makes operation very simple. Automatic adjustment of detection emission power.The non-linear junction detector can automatically adjust the optimal reception frequency to avoid interference from external noise, thus ensuring good results in complex geomagnetic environment.
Specification
|
|||||||||||||||||||||||||||||
| Product Tags: electronic components identification nljd detector nljd detector security checking equipment security checking non linear junction detector |
|
0.5w Non Linear Junction Detector Continuous Wave Mode 1.3 Hours |
|
Nonlinear Normal Power 0.15 M Junction Detector 3.7V 7800mah |
|
2400 - 2483 MHz Nonlinear Junction 3.7V 7800mah Detector |
|
Not Less Than -120dbm Nonlinear Junction Humidity ≤90% Detectors 15W |
|
3.7v 7800mah Battery Operated Non Linear Junction Detector Low False Alarm Rate |
|
Electronic Components Identification Nljd Detector Security Checking Equipment |