Customized electrical forging factory load rail transfer cart

Brief Introduction --- Low Voltage Railway Power Electric Transfer Cart

The working principle of KPDZ is that the power source AC 380v is transformed to AC 36v two-phase and are respectively connected to the two rails. The transfer cart's wheels conduct the AC 36v into the electrical box; then the AC 36v is transformed into DC 48v and control the DC motor through the DC control system to make the transfer carts start, stop, go forward and backward and adjust the speed and so on.

Advantages --- Low Voltage Railway Power Electric Transfer Cart

1. The rail transfer cart has the advantages of long distance transport and high frequency;
2. With safety and mobility;
3. The rail transfer cart can be used in S-shaped track, curved track and high temperature occasions;
4. Hydraulic lifting system can be installed on the rail transfer cart.

Requirements for track installation

(1) The resistance between the orbitals is not less than 10 ohms. Because the rail should be insulated. The bottom of the rail is supposed to be coated with asphalt, with a 5mm insulating rubber plate, and the two sides of the rail should be filled with asphalt sand.

(2) If it is a seam rail, the rail joint should be 5mm×45 degrees chamfering, so as not to collide with the lower edge of the electric friction block. Our company uses the track used for welding.

(3) The track construction requirements are high, must ensure that the track insulation, can be unobstructed power supply, forbid metal parts to touch two tracks at the same time.

Parameter List --- Low Voltage Railway Power Electric Transfer Cart

Application --- Low Voltage Railway Power Electric Transfer Cart

The product complies with the JB/T6127-2010 machinery industry standard, has a high degree of intelligence, and has the advantages of compact structure, beautiful appearance, automation, accurate positioning, stable operation, strong climbing ability, long driving distance, safety and environmental protection, simple operation, and easy maintenance.It is suitable for transportation in various environments, and is widely used in aerospace, metallurgy, coal, heavy industry, shipbuilding, light industry and other fields.

Shipping --- Low Voltage Railway Power Electric Transfer Cart

1. Hoist and electric parts will be packed by plywood crate, for avoiding the demage from goods crash and impact during the delivery.

2. Girders and other main parts will be packed by plastic woven cloth, for preventing rust from soppy condition during the transportation.

3. Only the best transport solution will be taken for saving your cost uttermost on finance,security and time.

About Us--- Low Voltage Railway Power Electric Transfer Cart

tags:rail trailer,transport trailer